SS1 vs SS2

[daveakre]

Has anyone done back to back testing with a sloppy stage 1 and a sloppy stage 2? I'd be curious to see if the stage 1 would spool a large turbo quicker since it probably makes more low end torque.

Click to read more...

 

[Great White Drake]

In for info. Good question.

 

[Dumpsterpat]

I think I remember holdener doing a test that showed it making more down low and the same up top on a 4.8. I've often wondered if it would be more beneficial on a smaller engine. I'll prolly try one when it's time.

 

[watman02]

What were the specs of the SS1?

 

[Dumpsterpat]

What were the specs of the SS1?

560"/.560" (using 1.7 rockers) ADVERTISED DURATION: (Intake/Exhaust): 285°/292° DURATION at .050" (Intake/Exhaust): 216°/220° OVERLAP: 59° LOBE CENTER (Intake/Exhaust): 110°/118° LOBE SEPARATION: 114°

 

[Thirdgen89GTA]

560"/.560" (using 1.7 rockers) ADVERTISED DURATION: (Intake/Exhaust): 285°/292° DURATION at .050" (Intake/Exhaust): 216°/220° OVERLAP: 59° LOBE CENTER (Intake/Exhaust): 110°/118° LOBE SEPARATION: 114°

I read that as 285°/292° DURATION at .050" with a LSA of 114 and was like: Thats a big fuckin cam!

 

[Dumpsterpat]

I read that as 285°/292° DURATION at .050" with a LSA of 114 and was like: Thats a big fuckin cam!

Lol that's advertised, it's 216/220 @.50

 

[Thirdgen89GTA]

Lol that's advertised, it's 216/220 @.50

Thankfully you put the overlap in there, which made me re-read it 3x so I figured that out. Cause ain't no way you gettin only 59* overlap with a 285/292 @ 50.

 

[Kizzlebizz]

What about the sloppy stage 3?

I've been toying with the idea of running it n/a since I can run it on the .600 lift springs I already have. Just the old switcheroo in an afternoon.