Sprayin Gets a Coyote

[Sprayin]

What’s it look like now?

It's just much smaller. I got a 3 jaw and have been grinding down the edges to get it to fit, but now it slips off. I've been fighting with this for like 5 hours. This is ridiculous.

 

[1quick]

It's just much smaller. I got a 3 jaw and have been grinding down the edges to get it to fit, but now it slips off. I've been fighting with this for like 5 hours. This is ridiculous.

This one was recommended to me either off the forums or from vmp I can’t remember but it’s on amazon that’s where I got it from

 

[Sprayin]

This one was recommended to me either off the forums or from vmp I can’t remember but it’s on amazon that’s where I got it from

Yeah that's the Chrysler style one. I have that. Doesn't work.

 

[1quick]

I’m guessing they got rid of these tabs on the new one I put my puller on the tabs since they are thinner

 

[Sprayin]

The hub is just thicker. The Jaws are too thick to fit. So I grinded them down so they'll fit, but then there isn't much meat left to grab on.

 

[1quick]

Looks like you almost have it hopefully it’s easier going back on

 

[Sprayin]

I got a different tool to try. We will see how that goes.

 

[1quick]

When you get the new one on snap a couple pics of you don’t mind I was worried mine wasn’t on all the way because the snout didn’t go flush with the new pulley hub face, but the back pulley was only a 1/8-1/16 from touching the motor when it torqued down to spec

 

[1quick]

But the belts lined up perfect so I’m assuming that’s all it had to go

 

[Sprayin]

That picture I took was without pulling it out at all actually. I took it last night to try to figure out why I couldn't fit my tool in there.

 

[1quick]

Makes sense, I didn’t look at mine before I pulled it off I figured it was flush

 

[Sprayin]

I got it with this new tool. Basically it's the one you linked but with low profile Jaws.

 

[Sprayin]

So the car went on the dyno today. Made a little less than I was hoping, but I'll just make excuses like "oh it was hot" and "oh it was on a drag radial" and "oh it was done in 7th gear" and what not. I'll see if I can download the video on FB. I may or may not post numbers in here.

 

[Mook]

Ya, you'd definitely wanna hide those numbers from all us grudge racers lol.

 

[Sprayin]

Ya, you'd definitely wanna hide those numbers from all us grudge racers lol.

This place is like the first place on Google searches everywhere. [MENTION=5]Mook[/MENTION] has a cousin at Google or something.

 

[Mook]

Wut

 

[Sprayin]

https://youtu.be/6_4716fNdCk

 

[Sprayin]

The blue line is mine. The red on is their Whipple shop car. He was using it as a reference for me. The red line car went 8.7X with suspension, converter, etc.

 

[Mook]

Almost 900???

 

[cdh027]

Are you running the 2.9 or the 3.0?

 

[Sprayin]

3.0. 3.75" pulley with a 20% OD balancer 10 rib. It'd like 17psi.

 

[Sprayin]

Almost 900???

It'd be a lot cooler if it was over lol

 

[Mook]

Redyno in the fall

 

[Lord Tin Foilhat]

Nice

 

[cdh027]

Damn! That thing has got to be a blast.