Hi all, been lurking on the forum for a few months and finally decided to make an account. Made it out to a whopping zero events in 2021 but looking forward to 2022 fun.
I have a 2019 Golf R with alllll the bolt ons (literally).
Current mod list:
Engine/Transmission:
-EQT IS38+ Turbo (OEM size w/ upgraded bearing system)
-PR 925cc port injection
-EQT RS3 Brushless LPFP
-DBV2 Downpipe w/ GESi cat
-DBV2 3.5" intake (powdercoated Booty Blue)
-AMS Intercooler
-BFI Stage 1 motor/trans mounts
-Eurocode front chassis brace
-AWE Switchpath V1 catback
-AWE exhaust valve controller
-CCDesign Fab single exit SS exhaust (track use, ~25lb weight savings)
-ARM Motorsports charge pipes
-ECU/TCM tuning done by Stratified Automotive
Suspension/Braking:
-KW V3 Coilovers
-Stoptech ST-40 Front Brake Kit (~23lb weight savings)
-Unitronic Dogbone kit (Street version)
-BFI Lower Control Arms (RS3 bushings)
-Eurosport Camber Kit
-ISweep DCC Deletes
-TyrolSport subframe locking kit
-H&R 25mm Rear Sway Bar
-034 Motorsports Rear Trailing Arms
-034 Motorsports Rear Subframe Inserts
-Whiteline Front Adjustable Endlinks
-KartBoy rear endlinks
-Eurocode front chassis brace
-Eurocode rear chassis brace
-JXB Driveshaft Carrier
-SS brake lines x4
-Ferodo DS2500 brake pads x4
Exterior:
-Aerofabb front splitter
-Aerofabb rear spoiler extension
-OEM European sequential tail lights
For now, please enjoy some over edited pictures.
I have a 2019 Golf R with alllll the bolt ons (literally).
Current mod list:
Engine/Transmission:
-EQT IS38+ Turbo (OEM size w/ upgraded bearing system)
-PR 925cc port injection
-EQT RS3 Brushless LPFP
-DBV2 Downpipe w/ GESi cat
-DBV2 3.5" intake (powdercoated Booty Blue)
-AMS Intercooler
-BFI Stage 1 motor/trans mounts
-Eurocode front chassis brace
-AWE Switchpath V1 catback
-AWE exhaust valve controller
-CCDesign Fab single exit SS exhaust (track use, ~25lb weight savings)
-ARM Motorsports charge pipes
-ECU/TCM tuning done by Stratified Automotive
Suspension/Braking:
-KW V3 Coilovers
-Stoptech ST-40 Front Brake Kit (~23lb weight savings)
-4 piston calipers
-355x32mm two piece rotors
-Audi RS3 Aluminum subframe (~7 weight savings)-Unitronic Dogbone kit (Street version)
-BFI Lower Control Arms (RS3 bushings)
-Eurosport Camber Kit
-ISweep DCC Deletes
-TyrolSport subframe locking kit
-H&R 25mm Rear Sway Bar
-034 Motorsports Rear Trailing Arms
-034 Motorsports Rear Subframe Inserts
-Whiteline Front Adjustable Endlinks
-KartBoy rear endlinks
-Eurocode front chassis brace
-Eurocode rear chassis brace
-JXB Driveshaft Carrier
-SS brake lines x4
-Ferodo DS2500 brake pads x4
Exterior:
-Aerofabb front splitter
-Aerofabb rear spoiler extension
-OEM European sequential tail lights
For now, please enjoy some over edited pictures.