Power steering pump on my GP

Turbocharged400sbc

3800 & 4T80E > ALL
TCG Premium
Jun 16, 2007
32,540
15,847
hangover park IL
if the hardline is rusted inside the 5/8ths hex line nut, use vise grippes and clamp on each pair of flats (on the hex) to try and break the rust flakes....

if that doesnt work you can go ahead and break it free, remove the pump and unscrew the pump from the fitting (rock motor forward), replace the oring and thread the new pump onto the line, IROR
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info