My trans am

Jim Morris

midwest slowest LS1
Jul 10, 2010
36
0
Orland Hills, IL
31978_1203004974910_1822190291_402759_236945_n.jpg

31978_1203007814981_1822190291_402766_3214067_n.jpg

31978_1203007574975_1822190291_402765_6658381_n.jpg

31978_1203006814956_1822190291_402764_510027_n.jpg

31978_1203005774930_1822190291_402762_4441973_n.jpg

31978_1203005374920_1822190291_402761_1125743_n.jpg

31978_1203005134914_1822190291_402760_6217602_n.jpg

31978_1203004814906_1822190291_402758_7816055_n.jpg

31978_1203004694903_1822190291_402757_5465022_n.jpg

31978_1203004094888_1822190291_402754_5652904_n.jpg
 

Jim Morris

midwest slowest LS1
Jul 10, 2010
36
0
Orland Hills, IL
Are those LS2 fuel rails on there?

It's not stock either... no PS, no AC, catch can... which tells me cam most likely, something funky going on w/that TB too but can't quite put a finger on what it is.

Its a stock engine. No cam, heads, no anything. Hell the damn valve covers have never been off the car. Well until today. Got some fabbed Moroso ones I couldn't pass up. NIB $150. What car doesn't have a catch can on it? The ac? Thats what t-tops and powerwindows are for. PS? Whats the point with front runners?
 

Jim Morris

midwest slowest LS1
Jul 10, 2010
36
0
Orland Hills, IL
Since I don't street race the car:

HpTuners, Qa1's front and back with a 300 lb front spring, Moroso fabbed valve covers, throttle cable direct from pedal to TB, Hooker Super Comps, 1 Chambers dumped at the rear, UMI subframe connectors, UMI lca brackets, Midwest Chassis moly short ta, Spohn double adjust panhard, LG aluminum double adjustable lca's, Auburn Pro, TA girdle, Motive 3.73's, ARP studs all around, 15x3.5and 15x10's, 275/50 MT DR's/ET Fronts, MTS level 4 trans, TCI 4k, aluminum driveshaft, LS2/FAST 90, 90mm lid, Z06 MAF, chrs1313 ram air, bumper supports/insulation/ac/ps/battery/half of the speakers/spare/back seat(no metal cut out)/fog lights/cruise control/traction control, door bars are still in it, lighter Firebird hatch, stock rear sway bar/no front sway bar, b&m trans cooler mounted infront of the fog light hole. I changed the shifter knob because I can't stand the size of the factory trans am piece. Soon to go on are the heads/cam setup I have on the bench, ASP pulley, and I wanna hit it with a nice shot. The car will also be getting a UMI drag bar over winter. I don't know if this is accurate or not, but Rt. 66 scales had me at 3370 with 1 leather seat, and maybe and 1/8th tank of gas. I'm 285. The car still has alot that can come out.


I don't think i'm forgetting anything.
 

Thread Info