So some lonely modularfords.com member had some cabin fever being stuck in the upper peninsula all winter and managed to come up with a way to adapt the GT500 Eaton M122 to the 03-04 Cobra. It uses the case, plenum and rotors of a M122, the snout of a M112 and a custom milled adapter plate to mount to the lower intake as well as a few other odds and ends.
I believe he thinks he can sell the conversion kit for $500-600, and when adding the M122 and the other odds and ends it comes to around $1000-1200
Aside from being able to put the GT500 Eaton atop your Cobra, the plate allows you to use the GT500 TVS, 2.9/4.0L Whipple, 2.8/3.6/4.2LC KB's as long as you get a longer snout....quite the options
Anyways, here are the pictures and numbers...
link to the whole process ---> http://www.modularfords.com/forums/showthread.php/144882-M122-(GT500-blower)-on-a-Terminator
I believe he thinks he can sell the conversion kit for $500-600, and when adding the M122 and the other odds and ends it comes to around $1000-1200
Aside from being able to put the GT500 Eaton atop your Cobra, the plate allows you to use the GT500 TVS, 2.9/4.0L Whipple, 2.8/3.6/4.2LC KB's as long as you get a longer snout....quite the options
Anyways, here are the pictures and numbers...
First I am going to list all the mods to the car that matter.
VMP 100mm slot MAF
Dragon TB
BF 2.76" upper only
ported lower intake
BBK LT headers
off road X pipe
Spin Tech catback
60 lb injectors
BAP
AFCO dual pass intercooler
Test done on a Dynojet 424 at about 60* with NO ice or any cooling except fans.
All runs are SAE.
First test 19.5* timing seeing 16 lbs of boost (yes my stock gauge was off that much).
538 rwhp 493 rwtq
Second test 21.5* a little more boost (must have cooled down). When looking at the graph it says 556 but that was a fluke at the top.
~545 rwhp 505 rwtq
The third test was at 23*.
549.43 rwhp 511.91 rwtq
We decided to stop there since it was seeing so much more boost than I expected and it wasn't falling off like a M112 would.
I will follow up with a post with datalogs and graphs.
:dancing::beer::yes::rock::dance4::yahoo::headspin::shok::cheers::beerchug::clap::rockon:
link to the whole process ---> http://www.modularfords.com/forums/showthread.php/144882-M122-(GT500-blower)-on-a-Terminator