WTB LS 243/799 Heads

[cap42]

Rather buy from someone on this forum than the dredges of FB Marketplace or Clist...

So if anyone has a set of LS 243's/799's will even entertain 706/862's, I'll need them with valves and not looking to machine the deck. Shoot me a PM.

Click to read more...

 

[DEEZUZ]

Shawn1112

 

[Shawn1112]

Rather buy from someone on this forum than the dredges of FB Marketplace or Clist...

So if anyone has a set of LS 243's/799's will even entertain 706/862's, I'll need them with valves and not looking to machine the deck. Shoot me a PM.

I will be removing my 317's in a couple of months if those will work. They were machined and have about 2000 miles on them.
I'll also have an intake, Holley TB, (cable) and injectors for sale as well

 

[HILROD]

I'm sure I have a few sets around here , let me see what part numbers I have.

 

[cap42]

I will be removing my 317's in a couple of months if those will work. They were machined and have about 2000 miles on them.
I'll also have an intake, Holley TB, (cable) and injectors for sale as welI

I already have 317's

 

[Shawn1112]

I already have 317's

Oh okay, good luck with your search. I'll keep my eyes and ears open for ya.

 

[Bru]

What came on a stock 98 LS1? That’s what I have With valves. Been sitting since 2015 in a bin.

 

[Pro Stock John]

'98s use different valve covers. Dunno what they are 806 or 241s?

 

[Bru]

Ah yeah, 806.

 

[HILROD]

I haven't got them out but they are 862. They have 61cc chambers when I looked it up. I don't remember if you had the flat top or dished 6.0 pistons.

 

[cap42]

I haven't got them out but they are 862. They have 61cc chambers when I looked it up. I don't remember if you had the flat top or dished 6.0 pistons.

I have a 2000 lq4 and from my research they say those are dished pistons. I haven't pulled the heads off yet to confirm.

 

[HILROD]

The lq4 is dished. I think I have 2 sets of heads. Need to go look for them. I think you would be better of will 65cc and more timing. Unless it's a later 6.0 with the better rods and you want to Rev it to the moon.

 

[cap42]

The lq4 is dished. I think I have 2 sets of heads. Need to go look for them. I think you would be better of will 65cc and more timing. Unless it's a later 6.0 with the better rods and you want to Rev it to the moon.

No mine's an early model with the crap rods. Let me know what you have I'm interested if they are in good shape.

 

[HILROD]

I couldn't find the matching head. Finally dug it out. The boxes are marked different. Lol. They are super clean low mile heads from an Envoy 5.3. I was gonna send them in for porting but PRC had a set a customer fell through on. So I saved one way shipping, time and free upgraded springs/retainers. Anyway they are o.e. not decked etc.