🔧 BUILD Jeff's Cookie Cutter Kitty and Porsche Killer Mustang GT

Status
Not open for further replies.

Jeffs FRC

TCG Elite Member
Aug 10, 2006
6,186
10,374
Lakemoor, IL
  • Like
Reactions: greasy

Jeffs FRC

TCG Elite Member
Aug 10, 2006
6,186
10,374
Lakemoor, IL
This pollen shit is getting real fucking old. Car was clean on Sunday and has literally just been sitting in garage.

CF1762E4-B1A3-4568-B90C-E44175723F2B.jpeg

21BBFEE4-AC9C-4629-A7A6-FA23CD79E459.jpeg
 

Jeffs FRC

TCG Elite Member
Aug 10, 2006
6,186
10,374
Lakemoor, IL
Threw the car on Drew’s dyno yesterday just to make sure the car is running correctly. Tried out one more size smaller pulley(3.1) and made some logs. Pulls were made in 4th due to not wanting to spin the rollers to 185mph on a 5th gear pull. Numbers would have been better in 5th anyways so I’m happy with this.

And it seems like the tuner can spice up my tune just a little more so I’ll send him the logs and dyno sheets on Monday and see if he would feel comfortable sending me a TCG track day “all the sauce” toon...lol

2B58CC8C-E514-447C-A811-A1F7CC214A98.jpeg

A666C9D6-A681-44A1-A3FC-2A5E2384AF28.jpeg

D26C18C2-989A-4C35-8D71-C275016A0413.jpeg
 

Jeffs FRC

TCG Elite Member
Aug 10, 2006
6,186
10,374
Lakemoor, IL
So.... no 10lbs of beeeeewst?
Nope, boost was showing peak around 15 on 3.2 pulley and close to 16 on 3.1.

Was talking to Drew about that and he thinks it might be possible that clutch was slipping not properly loading the car. Who knows, but it’s definitely showing the boost it should be at now.
 
  • Like
Reactions: Mook and BOTTLEFED

SonicBlur

Harvester of Sorrow
Oct 15, 2004
5,425
321
Schaumburg
Threw the car on Drew’s dyno yesterday just to make sure the car is running correctly. Tried out one more size smaller pulley(3.1) and made some logs. Pulls were made in 4th due to not wanting to spin the rollers to 185mph on a 5th gear pull. Numbers would have been better in 5th anyways so I’m happy with this.

And it seems like the tuner can spice up my tune just a little more so I’ll send him the logs and dyno sheets on Monday and see if he would feel comfortable sending me a TCG track day “all the sauce” toon...lol

View attachment 90423
View attachment 90424
View attachment 90425
Who is your tuner? I need my 16 S/C GT tuned as well.
 

Jeffs FRC

TCG Elite Member
Aug 10, 2006
6,186
10,374
Lakemoor, IL
Well the car had a horrible day yesterday but I found the next area that needs addressed. The belt system needs a 10 rib setup. I don’t think it’s slipping, but it definitely doesn’t like the hard shifts as both belts snapped on a shift. One on a 2-3 and the other on a 3-4. Going to go back to the 3.2 pulley and give the tensioner a little more room before it hits the stop to keep it happy during shifts.

Anyways here is the first pass off the trailer. Had pretty bad wheel hop in 1st and tagged limiter on 2-3 pretty bad. Just a sloppy ass run but was still my best.
7A19A4FC-209C-438C-A382-53E07FF40BDC.jpeg
 
Status
Not open for further replies.

Thread Info