BUILD I respect wood. I revere wood. I'm considerate of wood.

Mr_Roboto

Doing the jobs nobody wants to
TCG Blue
Feb 4, 2012
22,068
9,900
Nashotah, Wisconsin (AKA not Illinois)
It’s 5x5 or 5x127mm if you hate America.


Plenty of aftermarket wheels out there. Kinda dig c10 rally wheels, I also like them with older big body Buick wheels too.
The truck rallys were made in 15X8, I think most of the other stuff is going to be narrow stock. Honestly a lot of older wheels are getting harder to come by too.
 
  • Like
Reactions: sktchy3.8

Yaj Yak

Commander
TCG Blue
May 24, 2007
118,478
32,712
Niche score of 2,363
  • Like
Reactions: Mr_Roboto

Stink Star

Don’t Drive Angry!
TCG Blue
Jan 20, 2008
15,656
4,241
39
Big wood cock
Torq thrust II, no reason to look further

948AEEA6-9F33-4732-9D42-5C7775F7D0C3.jpeg
771B526D-9EBB-4C72-B3D8-FAE3CE042EB8.jpeg
 

Dave M

TCG Elite Member
Aug 28, 2015
1,779
2,414
Gurnee
I had a 1992 Roadie wagon when I was still in AZ that I bought at an estate sale for $2,500 bucks with 50k on it. I put 18x9's in the back and 17x7's in the front and it greatly improved the "handling". Mine also had the tow package with the rear self leveling air lift, shitty 2.XX highway gears, and a limited slip even though that thing couldn't spin the tires on glare ice with the L98 TBI sub 200hp POS, but I still loved that car.

Like an idiot, I ended up flipping it to a Snowbird from Michigan for $3,500 so I could scoop up an Eclipse TSi. :rolleyes:
 
  • Haha
Reactions: Yaj Yak

Thirdgen89GTA

Aka "That Focus RS Guy"
Sep 19, 2010
17,439
5,230
Buffalo Grove
I had a 1992 Roadie wagon when I was still in AZ that I bought at an estate sale for $2,500 bucks with 50k on it. I put 18x9's in the back and 17x7's in the front and it greatly improved the "handling". Mine also had the tow package with the rear self leveling air lift, shitty 2.XX highway gears, and a limited slip even though that thing couldn't spin the tires on glare ice with the L98 TBI sub 200hp POS, but I still loved that car.

Like an idiot, I ended up flipping it to a Snowbird from Michigan for $3,500 so I could scoop up an Eclipse TSi. :rolleyes:
Sir, that would be an L05 Sir, not an L98.

Sincerely, Thirdgen guy.

PS, please don't insult my 245hp L98, even though modern mini-vans would out-run it. :p
 

Mr_Roboto

Doing the jobs nobody wants to
TCG Blue
Feb 4, 2012
22,068
9,900
Nashotah, Wisconsin (AKA not Illinois)
L05 would be a tbi engine, so unless you swapped it would have been tbi. That said it would have had an l98 cam and high flow injectors.

Personally I have little love for the tpis after wrenching on them. They are a pain to work on. I would probably rather have a tbi with a performer rpm. Or a stealth ram.
 

Mr_Roboto

Doing the jobs nobody wants to
TCG Blue
Feb 4, 2012
22,068
9,900
Nashotah, Wisconsin (AKA not Illinois)
Let’s keep this about wood and LS engines. :rofl:


I have thought about tossing a cam and springs in the lt1 but seems not worth the effort for the gains. I’m amazed at how small cams are for gen 1/2 sbc’s

I'd think a CC503+bolt ons would net you mid 13s pretty easily without head work. Any more the question is who/how to get it tuned I'd think. Yeah it's not 500hp on motor but for the work vs a swap I'd think it'd be easy enough. Obviously a 6.0 would make power easier, but they're still a capable engine and it's already in there.