Ive compiled a list of parts from Jegs to get you 99% done with this.
This list is assuming you are using one big in-tank pump (the Walbro 400lph unit from Lethal)
In my many years of doing this, Ive learned that you should only have one pump in the tank. Its just too small in there to fit any more efficiently.. Couple that with the fact its quite difficult to run additional wires to a 2nd pump, although I have done it with a Racetronix wiring harness.
Im assuming a Walbro 400 with a BAP should support 550-575rwhp safely, but I havent done any testing. You can always add a Walbro GSS392 or Bosch 044 externally for a 900rwhp capable setup.
Ive attached a .pdf of the list. Its a thousand dollars, so dont get scared. :biggthump
I have not put the time into mapping it all out for you, and Im not sure I will, lol. If you are capable of installing it, you should be capable of figuring it out.
Any questions, just ask.
EDIT: The hoses listed are Blue, I meant them to be black
Also, the Aeromotive fitting towards the end of the .pdf is wrong.
Ill try and revise this when I have time.
In addition to the list on the .pdf, you will definitely need this:
http://www.amazon.com/dp/B00411W9HG/?tag=tcg21-20
Link to .pdf:
http://www.box.com/s/3ur1v5dedmn6kdazcaoj
This list is assuming you are using one big in-tank pump (the Walbro 400lph unit from Lethal)
In my many years of doing this, Ive learned that you should only have one pump in the tank. Its just too small in there to fit any more efficiently.. Couple that with the fact its quite difficult to run additional wires to a 2nd pump, although I have done it with a Racetronix wiring harness.
Im assuming a Walbro 400 with a BAP should support 550-575rwhp safely, but I havent done any testing. You can always add a Walbro GSS392 or Bosch 044 externally for a 900rwhp capable setup.
Ive attached a .pdf of the list. Its a thousand dollars, so dont get scared. :biggthump
I have not put the time into mapping it all out for you, and Im not sure I will, lol. If you are capable of installing it, you should be capable of figuring it out.
Any questions, just ask.
EDIT: The hoses listed are Blue, I meant them to be black
Also, the Aeromotive fitting towards the end of the .pdf is wrong.
Ill try and revise this when I have time.
In addition to the list on the .pdf, you will definitely need this:
http://www.amazon.com/dp/B00411W9HG/?tag=tcg21-20
Link to .pdf:
http://www.box.com/s/3ur1v5dedmn6kdazcaoj