HELP!!

98SilvermistGT

Well-known member
Joined
Sep 12, 2007
Messages
156
Reaction score
0
Location
Aurora, Illinois
Well I got the car scanned and it was misfiring on cylinder 2. Just as I thought because that ignition coil was bad when Zack and I changed my plugs and wires. I bought an ignition coil so I could replace it. Here is my problem I dont know what tool I need or how to get the darn thing out. Any help would be greatly appreciated because not running on all my cylinders sucks and my car is not getting any better. Someone please help me I would greatly appreciate it... :) Looking at it, it doesnt look like it will take that long to change. Thanks in advance everyone...
 

superchargedgp

Well-known member
Joined
Nov 11, 2008
Messages
2,253
Reaction score
0
5.5 mm socket ther are little bolts on the side of them
look from the top and you cant miss them

literaly 2 minutes of work
 

98SilvermistGT

Well-known member
Joined
Sep 12, 2007
Messages
156
Reaction score
0
Location
Aurora, Illinois
Where can I buy that cause I literally have no tools?? Thanks for the help so far... I saw the two screws holding it in and I know once I figure out how to get those out it will be easy to change...
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom