Help!! Rear main seal question

stupidgenius

Member
Feb 9, 2007
44
0
while i had my trans down for replacing my clutch i thought i might as well replace the rear main seal. i took the old seal out using a screw to grab it then pull it out.

the new seal that autozone gave me does not match what i removed from the block... i am wondering if the old seal broke in half. i'd go ahead and try to remove the rest of what appears to be the seal around the crank, but i dont want to screw into something that's not the rear main seal.

here is a picture of what my crank looks like right now. is part of the old seal still stuck in it, or did i get the wrong seal from autozone?

crankshaft area
new seal on left, old on right
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info