đź”– Deals Harbor Freight Deals

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
thats legit
Also, keep an eye out for this. They occassionally put these out for $299. They did like a month ago, and I dragged my feet. I would use it more for a utility purpose, not necessarily a tool chest.

1734969150112.png

Here is a slightly different variant with doors (I believe that they're actually identical or virtually identical in measurements). I might get one of each of these (the one above and this) for that utility purpose.

1734969257750.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
These came through today for Inside Track Members. So you need to be one to get it.

First;
1735933555224.png

Second... As I eluded to above, these Yukon Cabinets are normally $349. With Inside track club, they just put them down to $299 and I am going to go get one in blue to match the $299 workbench/cabinet in blue that my Wife got me for Christmas.

1735933628295.png

1735933660804.png

1735933682369.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
What came through today...

Note, the jack is NOT the more desirable long reach low profile 3-ton, just a regular jack

1736270484691.png

And then these (I have them in blue);
1736270566373.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
Todays...

This Daytona Jack is 21% off. This is the ones many of us, myself included, have. I may go pick up another orange one, so I have two blue, two orange.

1736542745997.png
 

SirMarco

of Pingree Grove
Joined
May 11, 2009
Location
Pingree Grove
What do you think about that 8 gallon air compressor?
I want to get one for the house. Not any major work for it. Filling up tires, small air tools for working on the motorcycles or maybe a nailer.
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
This one?

What will you be using it for?

Being an 8 gallon unit, really anything more than pumping stuff up and using it with blowing air tools and maybe occasional impact wrench work, it will be running more frequently. Being oil free depending on how hard you use it, it may not last as long. Also, oil free units are obnoxiously loud. But it does have a max 150PSI and has decent CFM and runs on 120v. The thing you may find with it being 8 gallon and if you do use it for an impact wrench (or bigger, heavier work type things), you will get a couple lug nuts off, then it will have to refill, and you may have to wait until it's filled again to get maximum power out of the impact/tool.

If that is a concern, I would look at one with a bigger tank. I've always had at least 20 gallon for work on cars and I have since move on to splash oilers. Much quieter and better for long run times.

1736546184374.png
 

Blownbyyou

TCG Elite Member
TCG Premium
Joined
Mar 27, 2008
Honestly, I don’t work on cars much any more…

But aren’t people moving away from air tools? I mean I use electric for everything? I have a 20 gal husky that I use to fill up tires and blow out my garage…but last time i used any impacts on it, I couldn’t tell you
 

LikeABauce302

TCG Elite Member
Joined
Aug 27, 2013
Location
South suburbs
The only thing I use compressed air for is die grinders or to blow dust off of something. I have 20v tools for everything else.

There are battery powered die grinders now, but the ones I've looked at are pretty bulky. I like how compact the air powered ones are.
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
For general quick things, I use my cordless impacts. But there are things I need the big hitter with air power. I think it's something like 1,000 ft/lb continous and 1,200 lb/ft breakaway. Like a year ago, when I was disassembling things on the old Suburban before selling it, and even the big air gun had a hard time busting some loose. Others it just ripped the bolt in half. My cordless could never muster that level of power.

I also need air power to run the safety locks on my lift as well as a separate bumper/frame lift that I use for the Suburban.
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
As I get these, I will continue to post. This just came this morning...

Shawn1112 Shawn1112 the winch you were looking at, is again on sale...

1736786879334.png

1736786906878.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
Ok, I will keep an eye on it. I just checked this email addy I have with HF and this popped up today.
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
So, got around to checking this email today, and looks like HF, if you're an inside track club member, they're having ITC appreciation days. Similar to the 12 days of Christmas, they're doing a daily specialty deal. I will try to keep up as the days progress. Here is today and tomorrow.

1737959973791.png

1738008252174.png
1738008266912.png
1738008292150.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
Day 2 Inside Track Club members.

1738041492301.png

This is their T8 scanner, it lists at $899.99, so 20% off puts it around $720. I don't know how good it is, but if you want a cheap bi-directional tool, this might be a nice pickup.

1738041510188.png

1738041532017.png
 

LikeABauce302

TCG Elite Member
Joined
Aug 27, 2013
Location
South suburbs
I wouldn't mind an Icon T8 Scanner.

For anyone that's does a lot of electrical or just hates cutting themselves on sharp zip ties, the Icon flush cut pliers are awesome. I've held them in hand side by side with Snap On's equivalent and it's hard to tell them apart.

 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
Ok, I feel bad I, missed yesterday's deals as I got busy at work...

Here is today's, plus a bonus one on Daytona jacks and jackstands.

1738251768899.png

1738251783061.png

1738251800807.png

Then the Daytona jacks. These are regular deals, not inside track club. The 3 ton, low profile, long reach one for 189.99 is ~20% off;

1738251853560.png

1738251893155.png
 

CMNTMXR57

GM, Holden & Chrysler Mini-Van nut swinger
Staff member
TCG Premium
Super Moderator
Joined
Sep 12, 2008
Location
Elgin
They've been kinda quiet lately but this came today. 30% off items $20 or less and then super coupons for Inside Track Club members.

The Daytona Long Reach, Low Profile 3 tons jacks are 25% off with this super coupon...

1738957186046.png

1738957205826.png

Shawn1112 Shawn1112 the 9,500 pound winch is $280.

1738957263673.png
 
Top Bottom