Had Tim Barth adjust my tune....

HellPIG

Well-known member
Joined
Sep 13, 2012
Messages
978
Reaction score
40
Location
Mount Prospect
Have the car setup to run E70 or E85 on the small pulley or switch back to the bigger one and 93. Car made its normal 784rwhp on 93.....

Adjusted for corn....

IMG_0900.jpg
 

Bru

Well-known member
Super Moderator
Donating Member
Joined
May 24, 2007
Messages
37,069
Reaction score
182

Spivitz

The Throttle is ur friend
Donating Member
Joined
Oct 5, 2012
Messages
22,804
Reaction score
670
Location
60191
898 to the wheels.

Hang on










:wackit:
 

P40E

Well-known member
Joined
Nov 4, 2012
Messages
7,421
Reaction score
54
What rpm does it hit 800 ft lbs . ? :nice:
 

HellPIG

Well-known member
Joined
Sep 13, 2012
Messages
978
Reaction score
40
Location
Mount Prospect
What rpm does it hit 800 ft lbs . ? :nice:
I don't know, I'll have to ask him, this graph has a big dip from the torque management kicking in. The trans was hot and got pissed. It had to be driven around a bit to ditch as much 93 as they could before we dialed it in.

It also was the MPH scale and not the RPM like my other one. All I can say is that rolling into it 1/2 throttle is builds so quick, just the nature of this type of F.I. setup.
 

Mook

El Presidente
Admin
Joined
May 23, 2007
Messages
164,612
Reaction score
2,390
Location
Elgin
Need to convince Tim to join the site.
 

HellPIG

Well-known member
Joined
Sep 13, 2012
Messages
978
Reaction score
40
Location
Mount Prospect
Fine as long as you leave torque management in it.

Some smoked theirs early on with learning how to tune them. I have the transmission tuned as well, which has only been offered for a short time. Street and sport mode operate the same, but if I put it in track, it will shift better and at 6350-6400 vs the normal 6000-6100.

There is a guy in Florida who has over 300 1/4 passes on his and it runs 9.4-9.5 all day. The fastest auto car still runs a stock A8 as well.
 

Shawn1112

Well-known member
Donating Member
Joined
Aug 4, 2010
Messages
7,345
Reaction score
614
Location
Streamwood
Need to convince Tim to join the site.
Dude he is so fucking busy, I'd be surprised if he had time to take a shit once a day, lol. Although he just hired a couple more guys so he might have some time now. I will run it past him.
 

blakbearddelite

I'm not one of your 'shit-hole' buddies!
Donating Member
Joined
Jun 28, 2007
Messages
24,968
Reaction score
198
Location
South Elgin, IL
I asked Tim last year about being involved with another forum and he didn't seem terribly interested in it. Most of his activity seems to just be on FB.
 

Pressure Ratio

....
Donating Member
Joined
Nov 11, 2005
Messages
16,247
Reaction score
280
Location
Glen Ellyn
Out of curiosity, how much do shortblock go for? How about complete motors?

Like if you were to damage a piston or something, how "affordable" is it to replace?
 

HellPIG

Well-known member
Joined
Sep 13, 2012
Messages
978
Reaction score
40
Location
Mount Prospect
It's setup to run 93 with a 2.85 pulley and e85 with the 2.5 pulley.

Cai, injectors, fuel pumps, tune
 

HellPIG

Well-known member
Joined
Sep 13, 2012
Messages
978
Reaction score
40
Location
Mount Prospect
They have come down a lot.

376 stock ci built is around 6000
426 stroker ci built is around 7000

Trans stock 4000 w/core.

To build a stock one is 6000.
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom