GTP Demod intiated...

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
Well, I’m gonna start tossing stuff up for sale slowly as it comes off the car. At the moment I have the following parts that can be pulled off the car fairly quick.

-----------

### Thrasher quick change pulley system with 3.0 and 3.25 pulleys $110 obo
If you want it we need to swap snouts since i cant pull the hub off now....or you can take the whole blower with the pulleys for $220 (supercharger needs a coupler though...$30 fix)


------------

### 1997 Alternator..not sure if it fits other years...6 months old only.

$65 obo

------------

### Custom made "GTP" Trunk lid mat: This was made for me by Grand Design mat a while ago. It is a MDF board covered with gray carpet to match the trunk. It has raised letters that say GTP. Goes on the underside of the trunk and is visible when open. Very easy to install, and I will include brand new x-mas tree pins for installation.

$50 or make offer!



------------

MSP CAI thats a little scratched up and has a few cracks along one side but still functional. Will need a new filter and doesnt have the PCM tray anymore.
I originally paid $260 for it ( Link to product)

$50 obo





------------

### Car as a roller - SOLD!
### 18" AE077's - SOLD!
### Gauges and gauge pod - SOLD!
### TOG's - SOLD!
### Gen1 Intense 1.90 ratio rockers - SOLD!

Everything left is OBO at this point...make an offer. you might get lucky!
 
Last edited:

Yaj Yak

Harbor Master
Donating Member
Joined
May 24, 2007
Messages
90,618
Reaction score
1,632
where exactly are you located? and you got pics of wheels/tires.... tread depth and curb rash?

my buddy w/daytona is suuuper interested.

thanks

K J
 

Fish

From the mean streets....
Donating Member
Joined
Aug 3, 2007
Messages
36,281
Reaction score
83
Location
Chiraq
I might be able to answer for location. Northside.
 
OP
GraFFix

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
Ill get pics up tomorrow, I have to borrow a camera. Depending how tired I am The rockers, blower and togs will be off the car tomorrow night. And will have pics of those also

Im located on the NW side of Chicago...Close to Harlem Ave and Irving Park Road.
 

Mccarlin

A Blown V10 WHAT?!?!?
Joined
Jan 17, 2008
Messages
111
Reaction score
0
Location
NW Burbs
Ill get pics up tomorrow, I have to borrow a camera. Depending how tired I am The rockers, blower and togs will be off the car tomorrow night. And will have pics of those also

Im located on the NW side of Chicago...Close to Harlem Ave and Irving Park Road.
i got a camera you can borrow
 
OP
GraFFix

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
Your selling the SC too?
Is it P&P or Gen V?
Yea ill sell the blower...its just a stock blower with the thrasher hub on it. I have 3" and 3.25" pulleys for it. and FYI it need a coupler...

### Thrasher quick change pulley system with 3.0 and 3.25 pulleys

$110 obo - On the car still. I need to get a puller. or you can take the whole blower with the pulleys for $250 (supercharger needs a coupler though...$30 fix)


Ill even lower the price to $230 for the whole setup...Its either coming off the car tonight or tomorrow for sure, along with the rockers and togs
 
Last edited:

Yaj Yak

Harbor Master
Donating Member
Joined
May 24, 2007
Messages
90,618
Reaction score
1,632
let me see pics asap. my buddy is very interested and is home this weekend and would like to purchase if all is good.
thanks

K J
 
OP
GraFFix

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
Someone is supposed to buy the car after I pull off a few mods, but as of now I have no idea whats going on. If they do the hood is going with it if not then I will offer the car as a roller to whoever. If that doesnt work out It will get parted out completely and Ill call victory for the rest.

If anyone is insterested in it as a roller let me know. There is still going to be quite a few good parts on the car. F1 hood and Spoiler (spoiler has a crack along the seam), C-YA racing trans (3.29 gears, single chain, 2800 stall and shift kit on medium...freshened up about 1.5 years ago), GMPP Sway bars, GMPP lowering springs, KYB struts, Stainless mandrel bent custom exhaust - 3" DP, then 3" to the Y then its 2.5" liek I said all stainless minus the resonator and muffs. , smoked tails...and other misc odds and ends

If no oe buys it as a roller then it will all be for sale eventually.
 

Yaj Yak

Harbor Master
Donating Member
Joined
May 24, 2007
Messages
90,618
Reaction score
1,632
how much will it be for sale as a roller... and seriously let me know asap about those wheels.
 
OP
GraFFix

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
You know what if someone wanted to buy it as a roller...I would sell it right now with all the mods on it for $2500. It would include everything on ive listed here..plus whatever extra parts i have in the garage. The mods on the car alone..even used are worth more then $2500. Honestly someone could pull all the mods off and make their money back then throw a motor in it and sell the car for more profit.

If i pull off a few mods like I am. Togs, rockers, gauges...etc then Id like to get $1500 as a roller. Ant takers?? Im going to look at a truck tomorrow, I could use more for a down payment lol

And just so people know the car isnt perfect...its a 10yr old daily driver. Ill get pics up later this evening.

Engine Upgrades
  • MSP Cold Air Intake
  • T.E.P Pully system with 3.25 pully
  • INTENSE 1.9 ratio Rockers
  • INTENSE Oil Restricted Push Rods
  • DHP Custom Programmed PCM
  • C-YA Racing Programmed PCM
  • 180* Thermostat
  • ZZP Throttle Body Spacer
  • RAT Throttle Body Heat Sheild
  • SLP IAT Spoof
  • Cheetah Poly Motor Mounts
Exhaust Upgrades
  • TOG Headers
  • ADFX Custom Downpipe (3")
  • ADFX Custom Catback Exhaust (3")
  • ADFX Custom Y Pipe (2.5")
  • Dynomax Ultraflo Mufflers
Transmission - Built by C-YA Racing
  • 3.29 Gears
  • Single Chain Conversion
  • 2800 Stall Tourqe Converter
  • High Impact Raybestos Clutches
  • C-YA Limited Slip Differential
  • Thrasher Shift Kit
Suspension Upgrades
  • KYB Struts
  • GMPP Lowering Springs
  • GMPP Front Sway Bar
  • GMPP Rear Sway Bar
Apperance Upgrades
  • MPD F1 Hood
  • MPD F1 Spoiler
  • GM Roof Rails
  • AE-077 18" Rims and Tires
  • Polished Stock 5 stars
  • Street Scene Aluminum Grills
  • Custom Trunk Lid Mat
  • Green Reflective Overlays on Badges
  • Painted Calipers
  • Chin Spoiler Front Air Dam
  • Carbon Fiber Gauge Bezel
  • Clear Corner Headlights
Miscellaneous Upgrades
  • Tri-Pillar Gauge Pod w/ Boost, Trans Temp, Air/Fuel ratio
  • AutoTap OBDII Diagnostic Scanner
  • Fuel Pump Hotwire Kit
Here is a link to a few pics of what the car looks like.

http://www.fquick.com/garages/viewgallery.php?albumid=1&carid=1954

Ill get a few up to date pics later on...right now it could use a wash and wax but other then that its still the same.
 
Last edited:

Yaj Yak

Harbor Master
Donating Member
Joined
May 24, 2007
Messages
90,618
Reaction score
1,632
wow very fair. but my buddy wants those wheels sooo uh yeah..
 

AlmightyBirdman

*shrug*
Joined
Mar 18, 2008
Messages
6,714
Reaction score
0
Location
Detroit Rock City
What color is the F1 spoiler and how much do you want for it?

Ahh I just noticed your fquick and saw it is forest green, you don't need a stock spoiler too do you cause if the price is right i'll more than likely take it off your hands
 
Last edited:
OP
GraFFix

GraFFix

A 302 and a little boost
Joined
Jan 3, 2008
Messages
501
Reaction score
0
Location
NW Chicago
KJ, I got ya man...Pics will be coming. want to send me an email addy ill email them tonight.

Birdman, whats a $300 spoiler worth to ya that has a crack along the seam. Ill rip that somamabitch off tonight and toss the stocker back on. LMK

Guys if you havent noticed yet...this isnt get rich quick scheme...I just need cash so i can buy a car. Make an offer all I can do is say fuck you...Umm, I mean no. :)
 

MuffHugger

Formerly GTP Mike
Joined
Jun 16, 2008
Messages
10,311
Reaction score
1
Location
Westmont
I'll give you $500 plus stocker for your trans. And how about $30 for the exhaust tips (pending pics)
 

Create an account or login to comment

You must be a member in order to leave a comment

Create account

Create an account on our community. It's easy!

Log in

Already have an account? Log in here.

Top Bottom