So I have finally made a decision on a direction I'm taking my car. I purchased a Hellion 7675 kit for my car last fall with intentions of a winter project. Well, that ended up snowballing into a crap load of money. So I ended up returning the kit. I went a few months of pondering just throwing on a Whipple/ VMP and be like every other 03/04 out there. Well by pure luck I found a guy selling a F1A kit with 0 street miles and roughly 20-25 passes, it so happened to be American Muscles shop car he had bought. He was removing the kit and it was a deal I couldn't pass up as it was half the cost of a Turbo kit.
For now I will use ProChargers intake and utilize the factory intercooler and front mount. I already have a 01 Cobra intake I will swap to in the future and then convert to A2A. At this moment I will be running E85, twin 465 pumps on a return system, Fore Rails with ID1000's injectors. Mac LT's with xpipe. Im not sure what I expect from the kit just that I will be different then most and she is going to love some Mexico highway pulls. I'm shooting for 800whp which may be difficult with that intake setup. Any feedback positive or negative is appreciated, as well as any tips you may have. I will post build pics, as I am also adding MM Kmember and control arms to work with existing CO's
For now I will use ProChargers intake and utilize the factory intercooler and front mount. I already have a 01 Cobra intake I will swap to in the future and then convert to A2A. At this moment I will be running E85, twin 465 pumps on a return system, Fore Rails with ID1000's injectors. Mac LT's with xpipe. Im not sure what I expect from the kit just that I will be different then most and she is going to love some Mexico highway pulls. I'm shooting for 800whp which may be difficult with that intake setup. Any feedback positive or negative is appreciated, as well as any tips you may have. I will post build pics, as I am also adding MM Kmember and control arms to work with existing CO's