<div class='quotemain'>
<div class='quotemain'>
i want to put a cut out in right after the cat. what size piping is that 2.5"
also does ANYONE know how to weld that could help me.
and does anyone know where i can get a cutout.. it doesnt have to be electronic the manual kind are fine.
[/b]
Fair muffler in LaGrange can take care of this for you. but i have to ask....why? they are not a performance adder on blower cars unless you are pushing some serious air. and even at that point people drop there exhausts completly. from your mod list i would not say its needed. i would bet it would hurt your low end torque quite a bit. If its for sound i would say save your money because 3800 blower setups sound horrible no matter what you do to cap them, and sound even worse open
DMH is a quality unit. QTP makes one but i have heard nothing but terrible things like units burning out and sealing issues. to tell the truth none of the units seal 100% when closed.
otherwise summit and jegs have universal mech. cutouts.
[/b][/quote]
yea ive heard a few 3800's with 1200 or so spent on exhaust mods and they still sound like crap. i figured id just spend like 100 bucks for a cutout and have my car sound the same as a 1200 dollar exhaust system. i wasnt doing it for power i had a cut out in my WS-6 and felt a terrible decrease in power when it was open.
[/b][/quote]
just drop your mufflers. that will sound loud and is free. For how long it takes to uncap a mech. cutout you could just drop your mufflers and be loud and save weight. good luck