🔧 BUILD Eagle's 92 Fox 5.0 5spd resto

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
It's hilarious to me how the build is progressing. Reminds me exactly of a highschool build!

The MAF and power pipe install looks janky too, but the damn pipe is so over sized that all I could find for now was plumbing fittings to make it fit. Maybe I'll look for some nice silicone stuff later. Maybe.
 
  • Like
Reactions: Yaj Yak

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
I installed my subframe connectors myself and it was a pain. I would just take it to someone with a 4 post lift. I did mine with jack stands under the K-member and rear axle. It wasn't easy to get the connectors fitted while laying on my back.

It's not my first rodeo on installing subframes on a garage floor :rofl: But yeah, I'd actually looked for assistance getting these in, but its sorta on hold for now... so I'm still looking to press ahead!
 
  • Like
Reactions: LikeABauce302

daturbosix

HNIC @ GoodFellas Garage
TCG Sponsor
Mar 2, 2008
16,372
15,216
Aurora
Real Name
Jeff
giphy.gif
 

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
N91 Camshaft. Requires aftermarket pistons and 1.6 roller rockers. RPM range 2800-6900.

347-408 c.i.d. Best performer for 347 cu. in., 1.6 R.R. & 6900 rpm shift point and 10.7 to 11.5 comp. Great with TFS or Edelbrock Victor Jr heads. Minimum 38lb injectors and 80mm mass air. Recommend 4.10 to 4.30 gears, poor drivability under 2300 rpm, lumpy idle, rpm range 2800-6900, needs 3500-4000 converter. Must use AFM valve springs.

Works great on 6900 rpm 10.5 to 11.5 comp. 302-331 c.i.d. with 4.56 gears and 30lb injectors. Must use AFM valve springs.

Example use of AF-N91 camshaft
1989 must, 5 speed, 4.88 gears ,347 c.i. 10.7:1cr,, PMS AFM N-91, AFM Stg III TFS TW Heads, 90mm t/b, victor 5.0intake ,Power Pipe, 42 lb injectors, fuel lab fuel system,msd 6a,MAC Long Tubes headers 1.625" dr gas x 93 oct fuel

:rofl:

Good thing I put 4.10s in this thing over the 3.73s!
 
  • Haha
Reactions: daturbosix

Eagle

Nemo me impune lacessit
Moderator
TCG Premium
Mar 1, 2008
63,904
4,732
Woodsticks, IL
Here's what I found on corral

Yeah, I found similar after looking just a bit. I got the cam card somewhere with the car... but I'm working ATM, so :p

What's your thoughts on the cam daturbosix daturbosix ? Its what was in the engine from the donor car, and I've driven it in the past. No complaints at all aside from some minor driveability issues at low RPM.
 

Thread Info