• đź’ˇ Fun fact. Whenever you start a thread, TCG Mechanic 5000 (our AI bot) will reply to you to start helping. It doesn't know everything and it will struggle with more complex questions but it can get the thread going and provide valuable information. You can choose to disable it prior to submitting a thread.

codes?

SLASH

God bless our troops.
Jun 20, 2005
11,024
0
p0127...ignition sensor too high

p0234...engine overboost condition

p0230...ignition/dist engine speed input circut malfunction

p0352...ignition coil "a" primary/secondary circut malfunction

p0352...ignition coil "b" primary/secondary circut malfunction

p0353...ignition coil "c" primary/secondary circut malfunction

p0354...ignition coil "d" primary/secondary circut malfunction

p0355...ignition coil "e" primary/secondary circut malfunction

p0356...ignition coil "f" primary/secondary circut malfunction

p0357...ignition coil "g" primary/secondary circut malfunction

p0358...ignition coil "h" primary/secondary circut malfunction

p1229..elec throttle control circut.

the problems i am having are related to either ignition or mechanical, possibly valve springs or whatever, i was dropping off considerably top end, evident in my run...any options/ideas. these codes kinda solidify the ignition possibility???



input please
 

01Sleeper

TCG Elite Member
Dec 11, 2004
3,660
1,871
Didn't you just get a boost a spark? If so, I would start there, since it is EVERY cylinder

p0127...ignition sensor too high

p0234...engine overboost condition

p0230...ignition/dist engine speed input circut malfunction

p0352...ignition coil "a" primary/secondary circut malfunction

p0352...ignition coil "b" primary/secondary circut malfunction

p0353...ignition coil "c" primary/secondary circut malfunction

p0354...ignition coil "d" primary/secondary circut malfunction

p0355...ignition coil "e" primary/secondary circut malfunction

p0356...ignition coil "f" primary/secondary circut malfunction

p0357...ignition coil "g" primary/secondary circut malfunction

p0358...ignition coil "a" primary/secondary circut malfunction

p1229..elec throttle control circut.

the problems i am having are related to either ignition or mechanical, possibly valve springs or whatever, i was dropping off considerably top end, evident in my run...any options/ideas. these codes kinda solidify the ignition possibility???



input please
 

VenomInside

Just Grazing
Jul 16, 2004
25,992
3,816
SAC/DEN/SFO/CHI/SEA/PDX
BAS and those expensice coils are not worth it for these cars. It has been proven that these mods do not gain any power. All it does it let you open up the spark gap a little bit. I'm not running one and doing good. Id ditch the BAS. just my .o2

Kevin

+1

When i had my 2.4 I only ran a BAP but never a BAS. There was no need for one.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info