Chicagoland machine shop to bore out my rotors?

Camarokid327

Fear of speed bumps but slowly getting over them.
Jul 24, 2013
145
0
Chicago
Please move if this is the wrong selection.

I am doing a CTSV brembo swap on my 2002 Camaro SS and I am using 2010 Camaro rotors. I need the hub bore opened up from 67.8mm to 70.6mm. Anyone have any recommendations on shops that will actual perform this and not charge some ridiculous price. I'm in the Roscoe Village/Lakeview area for reference.
 

Camarokid327

Fear of speed bumps but slowly getting over them.
Jul 24, 2013
145
0
Chicago
Why are you using the 2010 rotors on a 2002 car

Because I'll be running CTS-V 4 piston Brembo's up front and don't want to use C6Z rotors due to the fact I would need to use washers/spacers between the calipers and spindle arm.

I had Strange in Morton grove drill a Chevy pattern into Ford rotors. They charged $80, I’d call them and see if they can help you out.

Thanks, I'll give them a call!
 

Camarokid327

Fear of speed bumps but slowly getting over them.
Jul 24, 2013
145
0
Chicago
I had Strange in Morton grove drill a Chevy pattern into Ford rotors. They charged $80, I’d call them and see if they can help you out.
Unfortunately they won’t do it unless it’s their product.

try giving nayel a call at s&s chassis.he might be able to help you out.

Thanks, I’ll give them a call as well
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info