🔧 BUILD BOTTLEFEDS 96 cobra build

General Information

Ok, time to make the build thread so here goes

I bought this car about 4 years ago it was supposed to be "just a driver" while I finished a notchback that I was building,well the notch was sold to lineup on here and this build just keeps going now.

The car has had a bunch of different combos on it first was motor,then nitrous,then blower, then,blower and nitrous, currently it has a ysi and two kits on it lol

The details
Motor :
Stock b headed 120k mile motor yikes!
Short runner intake done by Nasvt
Chromed intake hat
mmr Imrc delete plates
Accufab throttle body
Bbk full length headers

Trans:
Stock t45
Spec aluminum flywheel
Spec stage 2 clutch
Aluminum driveshaft
B&m ripper shifter

Rearend:
Housing straightened and tubes welded by strange
Che rear axle brace
Upr axle brace
31 spline strange axles
T/a diff cover
4:30 gear
Detroit locker

Suspension:
Upr tubular k member -pile of shit
Upr tubular a arms- also garage
12" 250lb coil overs on front
Strange adjustable struts
Maximum motorsports caster camber plates
Eibach springs rear
Strange adjustable shocks
Upr adjustable upper control arms
Upr solid lowers
Poly Rearend bushings

Supercharger kit:
vortech ysi headunit
10% inovators west overdrive
5" thick intercooler
Tial bov
Anderson power pipe

interior:
Black on black 04 cobra seats
Full array of autometer gauges
Flip out screen headunit

Car is being built to just be a nice cruiser that I can have the ac on in traffic without an issue if I want, next upgrades will be moving battery to trunk and cleaning up more of the wiring under the hood, then doing the entire fuel system to run e85 this year

PXL_20211020_233230383.NIGHT-Edit.jpg
  • Like
Reactions: SaturdaysGS

BOTTLEFED

TCG Elite Member
TCG Premium
Mar 7, 2015
2,699
5,477
Yeah I need a little warmer weather to travel out that far at night lol, I could probably put together something down here if we were to keep it smaller I’ve got spots for digs and roll roads that are pretty long
Yeah, it's def too cold for now needs to get into the 50ish at night range. Im sure we could get a group together for some fun.
 
  • Like
Reactions: 1quick

Pressure Ratio

....
TCG Premium
Nov 11, 2005
20,303
11,728
Glen Ellyn
This guy knows!! :ROFLMAO:
Bottle in the spare tire well, in the air box, bottle in the gym bag behind the seat, bottle in the seat foam of the back seat, bottles in the doors, bottle behind a gutted dash, etc. Ya, I've done all of this before. Many times. Many were on the same car. haha Fake nitrous line to the throttle body with the real on under he intake manifold, etc.

Looking over Gangner's and Charlie's car.

Me: Roll down your door windows.

Gagner: No.

Gagner: Roll down your windows.

Me: No.


:bowrofl:




I also lost it when I saw NOS selling a nitrous kit in a gym bag years later haha
 

Milhouse

Addict
Jan 5, 2017
565
2,016
Bottle in the spare tire well, in the air box, bottle in the gym bag behind the seat, bottle in the seat foam of the back seat, bottles in the doors, bottle behind a gutted dash, etc. Ya, I've done all of this before. Many times. Many were on the same car. haha Fake nitrous line to the throttle body with the real on under he intake manifold, etc.

Looking over Gangner's and Charlie's car.

Me: Roll down your door windows.

Gagner: No.

Gagner: Roll down your windows.

Me: No.


:bowrofl:




I also lost it when I saw NOS selling a nitrous kit in a gym bag years later haha

We cut up a Bazooka sub and had my bottle in there. So unsafe. Just a bottle inside a plastic housing that was held down with some Velcro straps.

Now, SAS sells “bass in a bottle” a sub that looks like a bottle.
 
  • Like
Reactions: Pressure Ratio

BOTTLEFED

TCG Elite Member
TCG Premium
Mar 7, 2015
2,699
5,477
We cut up a Bazooka sub and had my bottle in there. So unsafe. Just a bottle inside a plastic housing that was held down with some Velcro straps.

Now, SAS sells “bass in a bottle” a sub that looks like a bottle.
They came out with an article in mmff on hiding a kit on a car it was pretty funny.
 
  • Like
Reactions: Pressure Ratio

Thread Info