🔧 BUILD BOTTLEFEDS 96 cobra build

General Information

Ok, time to make the build thread so here goes

I bought this car about 4 years ago it was supposed to be "just a driver" while I finished a notchback that I was building,well the notch was sold to lineup on here and this build just keeps going now.

The car has had a bunch of different combos on it first was motor,then nitrous,then blower, then,blower and nitrous, currently it has a ysi and two kits on it lol

The details
Motor :
Stock b headed 120k mile motor yikes!
Short runner intake done by Nasvt
Chromed intake hat
mmr Imrc delete plates
Accufab throttle body
Bbk full length headers

Trans:
Stock t45
Spec aluminum flywheel
Spec stage 2 clutch
Aluminum driveshaft
B&m ripper shifter

Rearend:
Housing straightened and tubes welded by strange
Che rear axle brace
Upr axle brace
31 spline strange axles
T/a diff cover
4:30 gear
Detroit locker

Suspension:
Upr tubular k member -pile of shit
Upr tubular a arms- also garage
12" 250lb coil overs on front
Strange adjustable struts
Maximum motorsports caster camber plates
Eibach springs rear
Strange adjustable shocks
Upr adjustable upper control arms
Upr solid lowers
Poly Rearend bushings

Supercharger kit:
vortech ysi headunit
10% inovators west overdrive
5" thick intercooler
Tial bov
Anderson power pipe

interior:
Black on black 04 cobra seats
Full array of autometer gauges
Flip out screen headunit

Car is being built to just be a nice cruiser that I can have the ac on in traffic without an issue if I want, next upgrades will be moving battery to trunk and cleaning up more of the wiring under the hood, then doing the entire fuel system to run e85 this year

PXL_20211020_233230383.NIGHT-Edit.jpg
  • Like
Reactions: SaturdaysGS

Rent Free

TCG Elite Member
Jan 26, 2015
24,407
20,261
Nowheresville North Dakota
And yea tq definitely comes in late, i wastegated mine its got a pulley setup on it for 30lbs bleeding off at 15 it helped a ton

Kickass. Ive always thought for a daily a centri is a match made in heaven for a high revving coyote.

Might not be ideal as a drag car but for a daily fun car its got to be a riot as it pulls harder with RPM.
 

BOTTLEFED

TCG Elite Member
TCG Premium
Mar 7, 2015
2,699
5,477
Oh looks alone it was worth it. And hopefully it saved you from one day having a failure from the stick stuff.

It's not like we haven't wasted more time and money on other stuff. lol
Yea it looks awesome but once i put the intake pipe on you'll barely see it lol, and yea i wont have to worry about a hose blowing off ever so.... its just a pain trying to get everything just right where the hoses wont kink, when i got this brilliant idea i thought it was gonna be much easier..... should've known better lol
 

Thread Info