Attn: Fish

Fish

From the quiet street
TCG Premium
Aug 3, 2007
40,517
7,871
Hanover Park
Real Name
Fish
Some have no issues with rockers. Some need to switch the exhaust side since the 1.85s are on the exhaust side.(ER rockers are 1.8 on the intake and 1.85 on the exhaust). Some just change both. I floated around 6000 and above so I switched to 90 lbs springs.

Id go with 105s if I had to do it again.
 

DanJ

>
Staff member
Moderator
TCG Premium
May 25, 2007
33,560
16,901
Aurora
From ZZP's site:
90# springs are GM LS6 yellow springs*. The LS6 comes from the factory with .550" of lift and spins to 6500 RPM to give an idea of what the springs were made for. Seat pressure is lower than the Comp Cams springs but spring rate is higher so they do work well for aggressive ramp rates. There springs work well with the VS, NIC, or XP cam. Because of the higher spring rate, timing chain dampener life is lower than with the 105's.

That's all i can really think of, that's why i'm probably going with the 105's over the LS6 springs.
 
Old Thread: Hello . There have been no replies in this thread for 90 days.
Content in this thread may no longer be relevant. Consider starting a new thread to get fresh replies.

Thread Info