🔧 BUILD Another 4x4 turbo wagon…

Ron Vogel

TCG Elite Member
Jul 12, 2007
5,173
4,268
Aurora
Real Name
Ron Vogel
Slowly trickling in

805748F0-1385-4FC4-B12C-C82563F2B186.jpeg
 

Ron Vogel

TCG Elite Member
Jul 12, 2007
5,173
4,268
Aurora
Real Name
Ron Vogel
Got my tires installed today….real close but not rubbing. Bought the wrong hub center spacers though, so looks a little funny until spacers come in I just ordered. I got sidetracked with the roof rack last night. Didn’t start until noon today on suspension. Got the pass side strut out and replaced wheel bearing. While the axle is out, replaced all 4 engine mounts (was a treat). While it’s still all open, I’m replacing o2 sensors next, then will pop the axle back in and the new strut spring combo. Probably will only get the front done tonight. Starting to get sore!

907582B6-4EB3-4EFC-A549-543C4D84C332.jpeg


92A49117-2396-42D5-8AB2-B2C4D0741F84.jpeg


9310D5A8-7BE4-451E-91D9-961916E302AF.jpeg


2C34DD1D-4EB4-46EB-9D1D-3B4592239B25.jpeg
 

Ron Vogel

TCG Elite Member
Jul 12, 2007
5,173
4,268
Aurora
Real Name
Ron Vogel
The struts aren’t all that bad to do…actually pretty easy. It’s all the other shit I’m doing that’s killing my progress. I spent 2 hours making an axle spacer, because the XC90 axles I’m using have the ABS ring 5mm off. Fronts are done, I’m taking a bath.

5329646A-2947-4E25-8D66-BFD8ED33EE7B.jpeg
 

bimmer4life

TCG Elite Member
TCG Premium
Feb 18, 2008
5,263
8,332
Wheaton, Illinois

Ron Vogel

TCG Elite Member
Jul 12, 2007
5,173
4,268
Aurora
Real Name
Ron Vogel
Link to light, these little suckers are bright, and have a well defined cutoff
 
  • Like
Reactions: bimmer4life

Thread Info