🔧 BUILD A piece of Americana at the Bedno house

[Mr_Roboto]

Seems to be going the right direction........

 

[Turbocharged400sbc]

Engines back out.
Well it's resting on the k member.

I forgot to divide by 2 and I need to fix the freeplay.... fork is not in the right spot.

And I think the forking retainer spring at the pivot is stretched, it was fairly rusty on the coiled section...so a trip to ace is in order.

 

[Dasfinc]

Engines back out.
Well it's resting on the k member.

I forgot to divide by 2 and I need to fix the freeplay.... fork is not in the right spot.

And I think the forking retainer spring at the pivot is stretched, it was fairly rusty on the coiled section...so a trip to ace is in order.

And its back out again XD

 

[Turbocharged400sbc]

 

[Turbocharged400sbc]

Bell off, grindit till it clears....

 

[Turbocharged400sbc]

So 9inch to 10 inch clutch conversion sucks when no one has any info out there.

Everything turns and clears.
A diaphragm style pressure plate probably woulda never had an issue. Borg and beck 3 finger....definitely an issue....

Radiators leaking at the lower plate, not gonna do shit but hopes and prayers....

I gotta do the fp wiring, properly, prime oil system, verify oil light goes out, drop in the dizzy.

I also forgot to grab my timing light.

 

[Turbocharged400sbc]

Cam has been broken in.

Runs great.

Clutch feels good.

Ready to drive

Has racetronix FP rewire

 

[Dasfinc]