Hey guys, been a while, over the last few weeks we've been tearing down the suspension on my 98 Olds 88 Royale LS, bascially replacing anything it may possibly need. I'm wishing now however that I had left these bushings alone.
Has anybody replaced the frame mounted front bushings for the front lower control arms on a 92-99 H body? Tried the K-M tool for it that GM calls for to press them out, but these things are seized in there. Also working in tight quarters in a storage unit, so no access to much for power tools, and only mapp gas for heat. I'm almost about to pull what's good off of it and scrap the shell, at a low 215k miles. Lol
Thanks in advance
Has anybody replaced the frame mounted front bushings for the front lower control arms on a 92-99 H body? Tried the K-M tool for it that GM calls for to press them out, but these things are seized in there. Also working in tight quarters in a storage unit, so no access to much for power tools, and only mapp gas for heat. I'm almost about to pull what's good off of it and scrap the shell, at a low 215k miles. Lol
Thanks in advance