🤝 Sold 4 lug ROH snypers 17x8/9

[Nate]

Staggered set of 4 lug snypers for 79-93 mustang. 245/45/17 MT fronts 275/40/17 MT ET streets rear. Rear 9” wheels have been drilled for 5/8 stud. Can be used with 1/2 stud and shoulder lug. 1400

Click to read more...

 

[Pressure Ratio]

Those rear wheels are more than just drilled out for 5/8" studs. The whole bore was opened up and a custom sleeve was pressed into the new bore. The sleeve offers much more contact with the shoulder of the drive stud and the wheel. Thus making these much stronger than a stock wheel drilled out. This conversion was done by a machine shop.

Up sell, man. Up sell. haha

 

[strtcar]

Those rear wheels are more than just drilled out for 5/8" studs. The whole bore was opened up and a custom sleeve was pressed into the new bore. The sleeve offers much more contact with the shoulder of the drive stud and the wheel. Thus making these much stronger than a stock wheel drilled out. This conversion was done by a machine shop.

Up sell, man. Up sell. haha

you should buy back and fit them on the Porsche

 

[Pressure Ratio]

you should buy back and fit them on the Porsche

Or buy them and put them on a new Foxbody project...

 

[Nate]

Or buy them and put them on a new Foxbody project...

Did I mention I have a set of 35 spline axles I’ll throw in the deal just for you Mr Pratt