I don’t believe anything has been printed on this mega fast machine.
Actually this is the 3rd iteration of this machine. The previous version use the standard 6 mm belts and they weren't strong enough we stripped a few teeth off of them at 1.6 amps
We are now running 12 mm belts on everything with the 148 oz in servos.
I could also see the harmonic from running the y-axis belt on the tooth side so I am now running it smooth side cross two points before it moves the hot end.
Now we should be good to run them at the full 2.8 amps.
Rigidity is everything.
I have all the wiring for the hot end I'm finishing making the chain way for the new Hemera carriage.
I should also note that you need to be really careful. Early on with this new build I kind of goofed during homing.... bent the two X limit switch brackets made out of angle auminum.... like they were paper.... before the windings melted....
Always be careful where your arms and fingers are