🔧 BUILD 1quick picks up a new dadf150 *UPDATE* Running 11s in a leased truck!

1quick

TCG Elite Member
TCG Premium
Jan 29, 2008
26,554
24,010
coal city
Got a little further with wiring, bracket is mounted fuel Hooked up to fuel solenoid, nitrous line hooked up, wires everywhere mounting this stuff in the compartment above the glovebox, trying to get what I have hooked up then I have to pull 3 more wires to the bed for the bottle heater

1C230FBD-FE51-4145-99DD-81C2FEEE068A.jpeg


3D6891B3-1160-4C4B-959D-E1F6D0AF651B.jpeg
 

1quick

TCG Elite Member
TCG Premium
Jan 29, 2008
26,554
24,010
coal city
Looks great dude! Is that bottle being mounted in the truck bed? Also I’m dying from your wife’s questioning!!!! :ROFLMAO::ROFLMAO::ROFLMAO:
Yeah the bottle is mounted in the bed plumbed bottle heater wired, I’m legit only waiting on a damn add a circuit from amazon right not to turn the system on and program the tps/window switch
 
  • Like
Reactions: greasy

1quick

TCG Elite Member
TCG Premium
Jan 29, 2008
26,554
24,010
coal city
Got some logs in, I’m not awesome at reading logs I can decipher afr timing an knock, I noticed on the two hits I logged yesterday when the nitrous kicked on it leaned way out, rob mentioned he had me order the kit I did so that I could add length to the nitrous line if I needed too so the fuel would start before the nitrous, so I did that I threw on a 2’ line I had laying around and did another 0-60 pull and it was dead nuts afr the whole time, I’m hoping to hear back from him Monday and finish her up, I’ve done 3 0-60 rips and it went 4.3 two times and 4.2 once, this 10 speed is awesome
 

1quick

TCG Elite Member
TCG Premium
Jan 29, 2008
26,554
24,010
coal city
Oh shit 4.2 0-60 is going to give me a run for my money. That is my best on current setup with slipping the clutch and still getting some tire spin. The truck is moving!
My hope was to have something that could contend with quick cars from a dig on the street, this is leaving in 4wd, and I still have more jetting to go I’m hoping for a 3.9 when it’s dialed in
 

Thread Info