follow_along_with_video_below_to_see_how_to_install_our_site_as_web_app
Note: this_feature_currently_requires_accessing_site_using_safari
this is WITHOUT the lift block?
FUCK YESDecided to take the blocks out of the rear for a slightly more level look, I think I’m actually going to drop the rear another 1.5” and drop the front 1-2” also
View attachment 46135
Bought 2” drop shackles and -1to-3 front beltech struts last night off amazon lol, dropped trucks has always been my thingFUCK YES
need to keep going lower and lower. Street trucks ftw
Yeah the rear fender started at 40” from the ground at the peak of the wheel well in the back it’s a pain in the ass to get in the bed on these thingsthis is WITHOUT the lift block?
jesus fuck, ford! lol
Nice! Belltech has never let me down. Curious how you’ll like the struts. I’ve got 2” drop spindles but bilstein struts.Bought 2” drop shackles and -1to-3 front beltech struts last night off amazon lol, dropped trucks has always been my thing
Fuck, that’s real good.
3”.....please 3”Well these look fairly well built, they can lift 1” or drop 1-3” in one inch increments, they were around 80 bucks each on amazon
View attachment 46296
Yeah, maybe powder coat black but I’m not spending money on rims for this thing, I’m like $230 total on a 2-3 drop I’m just doing some cheap improvements right nowI'm anxious to see what it looks like lowered. I sometimes wish I'd have dropped the rear instead of doing a leveling kit, and still might take that out and lower the rear when I get different wheels. All depends how it looks and which wheels I go with.
Are you keeping the factory wheels?
I herd you have to notch some bolt holes to get it to align right if you go more than 2” I’ll look into it lol3”.....please 3”
The rear will be 3 I did 1” already and ordered 2” drop shacklesI’d say if you can’t get the rear 3” too then I’d stick to 2” up front.
I don’t have all the parts yet lolWell, what are you waiting for?
I think 4” total in back with 2” up front would be good. 3” might be too rakedThe rear will be 3 I did 1” already and ordered 2” drop shackles
Yeah I’m going to measure the fender height and try to get it sitting flat I figured I’d need to drop the rear at least 1” more than the frontI think 4” total in back with 2” up front would be good. 3” might be too raked
I’ll still pull a boat trailer but nothing that would squat the truck much at allRake is usually about 2" but 1.5" looks best. I think a hair of rake is good just in case. LIke if you transport your Bike