1quick buys more stuff boat edition

[Jon01]

If it ran low 70's before I'm betting you picked up at least 5mph if not more once you get the prop figured out.

 

[1quick]

If it ran low 70's before I'm betting you picked up at least 5mph if not more once you get the prop figured out.

If this thing runs 75 I’ll be hard as a rock lol

 

[SleeperLS]

If not...

 

[Jon01]

If this thing runs 75 I’ll be hard as a rock lol

What did it run before?

 

[1quick]

What did it run before?

70-71 I hit 74 once by myelself with half a tank and 50* weather

 

[Jon01]

70-71 I hit 74 once by myelself with half a tank and 50* weather

You've added 75-100hp, I see no reason it won't hit 75 once you get it dialed in.

Enjoy!

 

[1quick]

So my poor old jl600x6 didn’t like running 8 6.5’s and 2 12’s lol I bought this 400 fosgate to power the 12’s and a new head unit and remote

 

[The Beast]

Love whet you did with the Yaht

 

[1quick]

Took it out for a ride today, so hard to be nice to the new motor lol but I kept it under 4000 rpm, sounds great on the water

 

[bikrboy128]

Hopefully see this one rippin on the river too

 

[SleeperLS]

I bet that felt good to get her out. Definitely excited to see some videos of this beauty.

 

[1quick]

I bet that felt good to get her out. Definitely excited to see some videos of this beauty.

my wife claims its way louder now but I don't think so lol, the fisherman at the dock may have felt different she said he almost fell down when i lit it off

 

[Outlaw]

Sounds awesome! I need another go-fast boat in my life What’s on it now for prop? I’ve got a handful of Mirage 4 blade labbed props laying around if you want to do some testing.

 

[1quick]

Sounds awesome! I need another go-fast boat in my life What’s on it now for prop? I’ve got a handful of Mirage 4 blade labbed props laying around if you want to do some testing.

I have a revolution 23 4 blade, they thought I needed a bravo 1 fs 4 blade 28 pitch, I’m looking for either that or a 26 pitch, this revolution torque steers real bad in the midrange and it scares my wife

 

[Outlaw]

I think I’ve got a Mirage 4 blade 26p on the shelf. It’s been labbed and has a lot of mid cup in it, might be a good happy medium between acceleration and cruise.

 

[1quick]

I think I’ve got a Mirage 4 blade 26p on the shelf. It’s been labbed and has a lot of mid cup in it, might be a good happy medium between acceleration and cruise.

if you find it let me know I may be interested

 

[1quick]

Noticed on my first ride water was getting in the bilge from somewhere, I noticed it last year and never managed to track it down, found my oil cooler leaking at a weld, so I upgraded it to the hp500 style cooler ordered not here yet, then I went in-depth inspecting the drop out bolsters they seemed soft, turns out they are really soft like falling apart, so here starts the next boat project, fortunately I can do a lot of work myself

 

[1quick]

Moar

 

[OffshoreDrilling]

Baby stuff. My entire boat was made of wood like that. The stringers were so rotted that they turned into powder and all that was left is what glass that originally surrounded the structure


those will clean up nice though

 

[1quick]

Baby stuff. My entire boat was made of wood like that. The stringers were so rotted that they turned into powder and all that was left is what glass that originally surrounded the structure


those will clean up nice though

the stringers and trandsom were already done in 2017 so I lucked out there, next thing is the sundeck the wood is rotten on that and the vinyl is smoked

 

[Turbocharged400sbc]

at least you have enough pieces intact enough to just trace the forms for the panels, i saw skizzers and cardboard......already started im guessing.

could you imagine 3800 blatt/drone on the water? it would carry for miles

 

[1quick]

at least you have enough pieces intact enough to just trace the forms for the panels, i saw skizzers and cardboard......already started im guessing.

could you imagine 3800 blatt/drone on the water? it would carry for miles

yeah I was piecing chunks together trying to make a pattern for the bottom of it

 

[Turbocharged400sbc]

take the easy way out, put the cover on the foam and just fill all the voids with epoxy, done

 

[1quick]

take the easy way out, put the cover on the foam and just fill all the voids with epoxy, done

that my be more expensive than plywood lol

 

[Turbocharged400sbc]

not nowadays