13 Coyote with Ford Racing 2.3 Whipple - 1st track visit

[95SC]

My brother's 13 GT making few hits after Whipple installation. We were shocked by the trap speed for such of low boost.

2.3 Ford Racing Whipple
factory 3.375 pulley [8lbs]
JLT intake
ID1000
JMS BAP
exhaust
drag radials
E85

https://www.youtube.com/watch?v=3SrdnbPLFu0

Click to read more...

 

[Mook]

[MENTION=63]blakbearddelite[/MENTION]

 

[Mook]

Nice mph!

 

[blakbearddelite]

Tim thinks my set-up should be good for mid-10’s. But with me driving, maybe low 11’s or super-high 10’s. With the stock MT82, I don’t know I’d do any real high rpm launches. I’d like to enjoy the car for a couple years before I need to dump that kind of money into it.

I’m betting my first time out will net a bunch of low 11’s, and probably a few embarrassing runs in the high 11’s or low 12’s. Third gear pulls so hard, so a 12 second run would have to mean I really screwed something up.

 

[syP]

that thing is a STALL away from a high 9 sec pass, easily

 

[95SC]

I think it will need more then a new TC to hit 9's

 

[TCG Member 5219]

I think it will need more then a new TC to hit 9's

Ryan is right. That sixty could be way better with a stall, and that would be 9.90s for sure. Love the auto.

 

[95SC]

Ryan is right. That sixty could be way better with a stall, and that would be 9.90s for sure. Love the auto.

I don't have much experience with Coyote platform but 6 tenths is alot to knock off when the car is already running 1.5's . This car would need 60' into 1.3s to run 9s, I don't think that's possible without adding power or loosing weight

 

[Shibby50]

My car barely makes 500hp on nitrous and weighs 3600lbs with a small 3800 stall and does 1.3x’s all day. Suspension setup right and the right one for your application will do wonders