Search results

  1. Sinister Drag Designs

    Anyone heading out to the Chicago Yacht / former scene party tomorrow?

    Just seeing if any of the boaters on here are heading out to the chicago yacht party(was the chicago scene dock party) on lake michigan tomorrow? I know alot of people changed plans when the scene couldnt get a permit for the play pen, but it got moved out to further on the lake and changed...
  2. Sinister Drag Designs

    APC on kimmel!!

    Any A Perfect circle fans on here? Just played "weak and powerless" and part of "imagine". They are still tight as hell for not playing live for years. Thinking of trying to make it out to one of west coast shows.
  3. Sinister Drag Designs

    🔖 Deals Great Deals on Magnaflow Exhaust Systems!!!

    Great Deals on Magnaflow Exhaust systems for LSX powered cars!!! Click Here!!
  4. Sinister Drag Designs

    Anyone headed out to the Chicago-Scene party on lake michigan on Saturday july 31st

    Just seeing if anyone is going to the Scene party tomorrow? Dropping the waverunner and boat in at the western ave boat launch @ 9:30am. http://www.chicago-scene.com/cs-parties/boatparty.htm
  5. Sinister Drag Designs

    PRJ gen 1-2 fuel rails and Intense OR Pushrods/ zzp poly trans mount

    Figure id post these to the locals first before I throw them on the site. Ive had these in my garage since I moved to palatine and dont want look at them anymore. First- a non-complete set of PRJ fuel rails They are a slight mix of gen 1 rails and gen 2 fittings. Does not include a FPR or a...
  6. Sinister Drag Designs

    Jeep CJ7 seats

    Figured id get the TCGs thoughts on the seat setup for my CJ. I ran across a local guy parting his CJ7 out and noticed he replaced both the front seats with a full bench(blowjob) seat, like how the rear seats come(but wider).He mounted the bench across the two stock seat brackets to support it...
  7. Sinister Drag Designs

    Stattama ST2 cam, YT roller rockers,Valve springs,misc

    Heres some random stuff I didn’t feel like putting on the site and we don’t have room for. Shipping not included unless noted 1-set of L67 cylinder heads- these heads were damaged in shipping but would be perfect for practicing porting. They would need to be milled too much to make workable-...
  8. Sinister Drag Designs

    Last minute christmas project

    So I came up with giving my cousin a larger cue stick case for christmas. All the ones I ran across were pretty boring and nothing fancy. I was watching the movie Pool hall junkies earlier in the month and noticed the guy that ricky schroder played had a les paul style hard shell guitar case...
  9. Sinister Drag Designs

    Corbeau Black CR1 reclinable race seat

    Corbeau Black CR1 race seat Very Comfortable, great shape. no tear or rips. Has slight sun fade on it where the harness sat. Was used in a show car so it was hardly ever used. The handle is on the right side but tucks in a bit so it can be used as a driver seat as well. includes sliders $190...
  10. Sinister Drag Designs

    A few DUB show pictures

    Wade and few friends at Chicagos DUB show http://www.sinisterdd.com/modules/smartsection/item.php?itemid=165
  11. Sinister Drag Designs

    odd craigslist find

    http://chicago.craigslist.org/nch/pts/1316536218.html "2010 DODGE VIPER! OWNER DIED IN IT! VERY BLOODY! RUNS GREAT & VERY FAST! MAY NEED NEW CARPET & DRIVERS SEAT! " :ohyea:
  12. Sinister Drag Designs

    2004 Pontiac GTO rolling chassis- $250

    Yes, you read that right, an 04 GTO for $250 obo interesting trades welcomed. The good has under 40k on it. Rear end and driveshaft included Two GTO 17" rims 1 original GTO spare with good tire Brake lines included and in good condtion PCM harness and battery harness in tact Title in hand...
  13. Sinister Drag Designs

    3800 parts, gauges and Misc

    Bunch of stuff laying around in storage Autometer Cobalt series digital voltage gauge 2 1/16 works perfect and looks new SOLD Autometer Sport Comp voltage gauge 8-18v 2 5/8th -$30 shipped Black gauge cup with silver mounting ring for 2 5/8ths gauges -$7 GTO blockers 4 pairs -$10 a pair...
  14. Sinister Drag Designs

    GI: Limited run of PEMs

    Figured this section would get a little more attention Just looking for opinions or suggestions mostly http://www.thechicagogarage.org/forum/showthread.php?p=556486#post556486
  15. Sinister Drag Designs

    Brand New WBS HID Kit(minus 1 part)

    Have had a WBS HID kit sitting here for little bit with 1 bad ballast that I never got off my ass to warranty. http://www.wbodystore.com/grandprix/HID-Light-Conversion-Kit-p-145.html They are 9006 bulbs in 6k temp. Great for someone looking to have extras just in case or if they can find a...
  16. Sinister Drag Designs

    Black Panther statue

    These seem like hot ticket items around the garage so I thought Id share the wealth and let another member pull in all kinds of tail with this bad boy. Looks great on coffee tables, nightstands, car dashboards and back windows. Be the envy of your friends and don't miss this one!!! Its two...
  17. Sinister Drag Designs

    05 L32/4t65HD into 97 Monte

    We have had a few requests to post about a customers 97 monte carlo that is getting a complete L32 and 4t65hd trans swapped in. This section gets the most attention so its fitting. http://sinisterdd.myphotoalbum.com/view_photo.php?set_albumName=album01&id=s4010057 Its a Z34 with a locked 3.4L...
  18. Sinister Drag Designs

    TCG New Years Eve plans?

    I know its not even christmas day but anyone got anything special going on NYE? Most hotels this year dont seem to be fully booked due to the economy.
  19. Sinister Drag Designs

    Eaton Gen 5 M-90 $450

    Eaton Gen 5 M-90 60k with stock pulley $450 Includes Boost-bypass Valve. New PCV Can include a Intense/ZZP MPS hub pressed on for $50 extra. LQ4 MAF available for $80. Installed on a car but never ran. Shipping Extra. Available for pickup No PMs Please
  20. Sinister Drag Designs

    M-90 Stock Cam Record???!!!

    Well the Chicago Garage had a little track outing at byron,il. We had been working on mikes car(12.99someday) since the last TCG outing to make sure it was going to break 11s. Sure enough on its 3rd pass it did ...and a backpass to match. [email protected] 1.765 60' With no rear end suspension...