Search results

  1. LikeABauce302

    💬 Off Topic Stellantis lays off 400 through mandatory remote work day

    This popped up in my news feed this morning. Interesting way to go about layoffs. Part of me thinks this is poor etiquette, but at least I wouldn't have to drive into the office and sit in traffic each way to find out I'm losing my job...
  2. LikeABauce302

    💸 For Sale For Sale: Ford 351w Shortblock

    1974 351w short block -bored 0.040" over -Speed-Pro L2446-40 forged pistons -stock "football" rods w/ ARP bolts -stock crank -converted to roller -unknown aftermarket cam -Ford Motorsport main girdle -Ford Motorsport SFI rated balancer -double roller timing chain -Melling M83 HV oil pump -Moroso...
  3. LikeABauce302

    🔧 Technical Installing SFI Bellhousing on a Ford AOD

    Anyone know of a trans shop that can cut off the bell housing on my stock AOD case and install a Quicktime SFI certified bell housing? I called Proformance and left a voicemail today, but wanted to see if anyone here knew of someone in case Proformance can't do it.
  4. LikeABauce302

    M/T ET Street Radials 275/50r15

    Anyone in need of a cheap pair of drag radials for the track day on October 9th? One morning at work, I impulse ordered a new pair, not realizing my old ones had plenty of life left :LOL: I used these tires last Tuesday and was cutting 1.52 60' times all day in my ~400 rwhp fox body. Always...
  5. LikeABauce302

    Any Chrysler Techs Here?

    I just recently installed an OEM trailer brake controller in my dad's '17 Ram 1500 Limited. I need to have the body controller flashed to enable the trailer brake controller function. I haven't had any luck scheduling an appointment at my local dealer. Anyone have an FCA dealer they recommend...
  6. LikeABauce302

    LikeABauce302's '88 Mustang Resto Project

    Now that I'm actually working on this car, I figure I should start a build thread. Specs: 1988 Mustang GT -stock 302 w/ exhaust and intake -AOD -3.73 gears I ended up with this car in 2011 after a girlfriend in college bought the car and lost interest in it. Shortly after I acquired the...
  7. LikeABauce302

    FS: Pair of Weld draglites with 28x10.5 slicks fits 79-04 Mustangs

    Up for sale is my pair of rear Weld drag lites off of my '90. Here are the specs: 15" x 8" 5.5" backspace 5x4.5 bolt circle. Fits 5 lug fox bodies or 94-04 Mustangs (excluding Cobras with IRS) Tires are 28x10.5" Mickey Thompson stiff wall slicks with plenty of life left on them. They have...
  8. LikeABauce302

    Where to Get Nitrous Bottles Re-certified?

    Does anyone know of anyplace local (preferably south suburbs) that can re-certify 5+ year old nitrous bottles? I have a 10 lb NOS bottle that's about 15 years old but looks hardly used. I'm wondering if I should just scrap it and buy another one, or if it's worth getting tested and re-certified.
  9. LikeABauce302

    Clock Spring Replacement on Chrysler 200

    Anybody a Chrysler tech or has anybody replaced a clock spring on a newer chrysler? The cruise control on my 2011 Chrysler 200 has been working intermittently. I dropped it off at the dealer last night to be diagnosed and found out the clock spring is bad. It's not covered under my CPO...
  10. LikeABauce302

    FS: Foxbody Anderson 4" Power Pipe and ProM 80mm MAF

    For sale is a 4" Anderson Economy Power Pipe for an 86-93 Mustang. It is in like new condition. I don't think I've even driven the car with this installed. I bought it brand new, but changed to a different setup and can no longer use this. $100 I also have a ProM 80mm MAF for 30 lb injectors...
  11. LikeABauce302

    FS: Mustang 4-Lug Centerline Convo Pro Bigs and Littles

    Since I upgraded to 5 lug, I can no longer use my Centerline wheels. Rear: 15x8.5" with 5" backspace Mickey Thompson 275/50/r15 Drag Radials - bald and need to be replaced. Chords are starting to show. Front: 15x4", I'm not sure on the backspacing. They fit nicely inside the front...
  12. LikeABauce302

    LikeABauce302's...2012 Boss 302!

    I posted up a build thread for my fox body, but this is the car most people will see me cruising in. I've always been a Mustang fan and fell in love with the Boss 302 when it was released in 2012. In college, at a formula SAE competition in 2011, I got a sneak peek at a 302R and Laguna Seca...
  13. LikeABauce302

    🔧 BUILD LikeABauce302's 427 SBF Twin Turbo Build. 404 Error: LS Content Not Found

    This thread is for the general discussion of the Item LikeABauce302's 427 SBF Twin Turbo Build. 404 Error: LS Content Not Found. Please add to the discussion here.
  14. LikeABauce302

    FS: 1998 Ford Explorer XLT 5.0 AWD

    The deal fell through on the truck I was trying to buy. I'm going to hang on to the Explorer for a bit longer.
  15. LikeABauce302

    Which Trans Brake Button is Preferred?

    I'm just finishing up the installation of a new trans in my 90 LX. I'll be running a trans brake for my first time and I'm trying to decide on what type of trans brake button I want to run. Does anybody prefer 1 over another? Are there any advantages or disadvantages of a remote button on a coil...
  16. LikeABauce302

    FS: Ford Smallblock 351W

    I decided to go a different direction and won't be using this engine. I have a 351w that has everything minus the heads. It has a stock intake manifold for a carburetor. As far as I know, its a mid 80s Ford Motorsport crate engine. It has 0.040 pistons and the cylinder walls are clean. I was...
  17. LikeABauce302

    👋 INTRO New guy here

    :wavey: O hai everyone! I'm sure some of you will recognize me. I'm new to this forum, but not new to the car scene. I look forward to meeting some new people and BS'ing with everyone on the forums. Here are some pics of my cars: The red LX hatch has light bolt ons and loud exhaust, the...