Ported Gen3, G/P Projectors, ZZP 3.5, + more! --UPDATED--
Updated on 04/02/11
Here's what's left:
This is a 3 gauge dash I modded some time ago. This will include BOTH the dash and shift console trim / bezel pieces. They are painted Black with a red tapered stripe using Krylon Fusion paint. NOTE: the DIC is still 100% useable $225 takes it. $275 including the cluster seen in the pictures.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Dash/
I started making a 2 gauge dash for someone else, but that deal fell through. I never finished the dash, but it wouldn't take much work to complete it. It needs a final sanding as well as some final filler. It is unpainted and the DIC is still 100% useable. $165....NO console piece.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Dash 2/
Flamed Brakes. I made/modded these and used them for one summer and 1.5 winters. This comes with Calipers and Caliper Brackets...(as well as if I happen to have any brake pads). These make your brakes look a LOT different (not to mention HUGE). Using a complete set of stock brakes, the whole look was completely overhauled/changed. These are a LOT easier to clean too!
Being there was a LOT of work involved in these, as well as you will get a complete set ready to swap, I can't see letting this go for cheap. Starting price is $375
See link for additional pics: -->
Daytona/Special Edition Grand Prix hood Heat Extractors. What you see pictured is all I have. These were disassembled to be sanded more effectively. $45
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/3800 parts for sale/
Various gauges. All are Stewart Warner MAX PERFORMANCE series, all worked prior to the demod. Available are a Nitrous Pressure gauge (NEW-UNUSED), BOOST and TRANS. TEMP. The sending unit does not come with the TRANS TEMP gauge, but parts are available through www.summitracing.com. All of the gauges have white numbering and light up with a red backlight. The Nitrous Gauge has bulb covers which will make it either green or red...the Trans. Temp and Boost gauges only have the red light bulb covers.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Gauges/
NITROUS GAUGE (NEW)........$50
TRANSMISSION TEMP............SOLD
BOOST................................$40
Home ported Eaton M90. It is just the rotors, snout and case. The inlet has been ported but not polished. Basically, the entire inlet area has just been smoothed to reduce heat & turbulence. The outlet has been filed down. The rotors are useable, but I was going to have them recoated. There is also a slight scuff in the machined area of the rotors. You can have BOTH the case and rotors coated to reduce heat and increase efficiency...which is what I was going to do.
Also, the snout has what I believe is a W-Body Store pulley hub on it. I have a ZZP 3.5 Pulley for sale and it does NOT fit on the hub. I'm not going to take the hub off, so you'll need to buy the whole thing to get it. $50
Pictures available upon request
Ported L67 Throttle Body. This comes with a Throttle Position Sensor and Idle Air Controller. You will need to use your own Mass Air Flow Sensor, Throttle Cable Plate and Inlet Turbulence Reducer. $50
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/PTB/
ZZPerformance 3.5 Pulley $40
FRONT
REAR
SLP GTX Strut Tower braces (Front and Rear....$325 FIRM ...these are THE BEST STB made for these cars and you WILL NOT find another SLP REAR STB OR the SLP front PROTOTYPE EVER AGAIN)
* * * * I will hold onto these because of their rarity if I have to because they DON'T take up much space * * * *
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/1986_MC_SS/SLP_STB/
3800 G/P parts Not pictured:
-A set of custom roof rails (rear section only)
-GTX style hood with mild GTO type raised hood scoops
----This was a project I started using a steel hood and never finished
Updated on 04/02/11
Here's what's left:
This is a 3 gauge dash I modded some time ago. This will include BOTH the dash and shift console trim / bezel pieces. They are painted Black with a red tapered stripe using Krylon Fusion paint. NOTE: the DIC is still 100% useable $225 takes it. $275 including the cluster seen in the pictures.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Dash/
I started making a 2 gauge dash for someone else, but that deal fell through. I never finished the dash, but it wouldn't take much work to complete it. It needs a final sanding as well as some final filler. It is unpainted and the DIC is still 100% useable. $165....NO console piece.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Dash 2/
Flamed Brakes. I made/modded these and used them for one summer and 1.5 winters. This comes with Calipers and Caliper Brackets...(as well as if I happen to have any brake pads). These make your brakes look a LOT different (not to mention HUGE). Using a complete set of stock brakes, the whole look was completely overhauled/changed. These are a LOT easier to clean too!
Being there was a LOT of work involved in these, as well as you will get a complete set ready to swap, I can't see letting this go for cheap. Starting price is $375
See link for additional pics: -->
Daytona/Special Edition Grand Prix hood Heat Extractors. What you see pictured is all I have. These were disassembled to be sanded more effectively. $45
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/3800 parts for sale/
Various gauges. All are Stewart Warner MAX PERFORMANCE series, all worked prior to the demod. Available are a Nitrous Pressure gauge (NEW-UNUSED), BOOST and TRANS. TEMP. The sending unit does not come with the TRANS TEMP gauge, but parts are available through www.summitracing.com. All of the gauges have white numbering and light up with a red backlight. The Nitrous Gauge has bulb covers which will make it either green or red...the Trans. Temp and Boost gauges only have the red light bulb covers.
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/Gauges/
NITROUS GAUGE (NEW)........$50
TRANSMISSION TEMP............SOLD
BOOST................................$40
Home ported Eaton M90. It is just the rotors, snout and case. The inlet has been ported but not polished. Basically, the entire inlet area has just been smoothed to reduce heat & turbulence. The outlet has been filed down. The rotors are useable, but I was going to have them recoated. There is also a slight scuff in the machined area of the rotors. You can have BOTH the case and rotors coated to reduce heat and increase efficiency...which is what I was going to do.
Also, the snout has what I believe is a W-Body Store pulley hub on it. I have a ZZP 3.5 Pulley for sale and it does NOT fit on the hub. I'm not going to take the hub off, so you'll need to buy the whole thing to get it. $50
Pictures available upon request
Ported L67 Throttle Body. This comes with a Throttle Position Sensor and Idle Air Controller. You will need to use your own Mass Air Flow Sensor, Throttle Cable Plate and Inlet Turbulence Reducer. $50
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/PTB/
ZZPerformance 3.5 Pulley $40
FRONT
REAR
SLP GTX Strut Tower braces (Front and Rear....$325 FIRM ...these are THE BEST STB made for these cars and you WILL NOT find another SLP REAR STB OR the SLP front PROTOTYPE EVER AGAIN)
* * * * I will hold onto these because of their rarity if I have to because they DON'T take up much space * * * *
See link for additional pics: --> http://s90.photobucket.com/albums/k278/lazadc2/1986_MC_SS/SLP_STB/
3800 G/P parts Not pictured:
-A set of custom roof rails (rear section only)
-GTX style hood with mild GTO type raised hood scoops
----This was a project I started using a steel hood and never finished
Last edited:
