Christmas wish list for your LSx car?

[tmbutitta]

Selling the Goat?

yes sir

it made the original goal, and i cant afford to make it any faster.

 

[EmersonHart13]

Drop it off a cliff? Then it will be real fast!

 

[Stink Star]

17x11 ZR1s powdercoated black with 315 nittos in the back

helped a buddy do that on a 93 camaro.... requires some "fine tuning" with a 3 pound sledge! lol

 

[Carls2001ws6]

A job

A transmission would be nice, last one only lasted 300 miles

 

[OffshoreDrilling]

Just some new shocks out back. Im done with it for the most part. My rear main seal is starting to leak, so I may be tempted to try a different converter while Im fixing that.

 

[smug]

A new car that is not a piece of crap

I guess that means not another GM

 

[JDHedman]

Forged Ls1 short block
trick flow heads
SLP Double Roller Timing Chain
LS7 Lifters
Thunder Racing Ported & High Volume Oil Pump
42.5 Injectors
Racetronix Dual Walbro Intank 255 Pumps
QA1 Adjustable Front shocks
Strange S60 with 4.11 gears
Strange Chrome moly Driveshaft
new Headlights
2-Step Launch Controller
Slicks
LS6 Money Maker nitrous setup
Harwood hood
one off katzkin custom seats
ls1 big brake kit - want to sell the wilwoods
thats about all for this x-mas lol

 

[TransHed]

LPP Headers... perhaps.
17x9.5/17x11 Machined C5 Deep Dish rims with 315 Nittos... for sure.

 

[00firebirdarev]

Damn I think I need to add some things to my list.... Some slicks and skinnies would be nice.

 

[ktraver97ss]

helped a buddy do that on a 93 camaro.... requires some "fine tuning" with a 3 pound sledge! lol

See I hear different things, some people say they fit with no BFH adjustments. I will be doing the coilovers before the rims and tires so I was hoping to be able to adjust the ride height rather than beat the shit out of my wheel wells.

 

[Edmond]

I'm seriously thinking about a ProCharger. Hell, I might get it done in Sept. after I get down to Louisiana. Might also get something that is a true CAI and ditch the SLP Blackwing.

 

[skeezer]

seats

 

[Bones]

Plan on switching over to Kooks Headers/Borla Catback Exhaust
Slammed - 1.5 inch Drop
And a FAST Intake.

If I can swing it maybe a Patrick G cam. But, I rather get the TRUE exhaust system I want on the car first. That will make it sound that much sweeter after the cam swap.

 

[utryd2]

Mine is more of a wish list but I will make it happen eventually. No particular order just stuff I need/want.

Paint new hood and install
A real rear tire setup (for playing) maybe ccw drag pack
Larger fuel system so I can finally pulley the damn car and make some power
Maybe blower cam
Becool or Dewitts radiator
Remove long tubes and get coated
pfadt motor mounts
pfadt trans/diff support
pfadt bushings through out
pfadt or Lg coilovers
oil cooler
Big brake kit
rpm trans
seats
maybe sell fast 90 and get 102
Some cosmetic stuff

 

[Bones]

For the Camaro SS

-Kooks LTs <-Sick of the rusty pacesetters
-Borla Exhaust - Looking for a nice used system, Miss that tuned exhaust.
-Lowering 1.5 inches- Gold Lines and Bilstein Shocks.
-New Brake system, maybe a Baer kit, or wilwood or CTS-V. But my brakes -blow, one piston is fucked on the front so something needs to be done.
-Black C6 Z06 rims - Because I want another set of rims, just because.

Thinking of a custom grind Patrick G cam as well. Not sure what the specs will be. This is my winter wishlist though, not just for X-mas.


70 Nova SS - Not an LSX car but...

Going to rebuild the carb.
Go through the fluids and getting it to fire back up.
Then just A LOT of body work. She already has a solid roller cammed LT1, not sure on the specs since I haven't had a chance to touch the motor yet, but the body is the main focus first.

 

[TransHed]

For the Camaro SS

-Kooks LTs <-Sick of the rusty pacesetters
-Borla Exhaust - Looking for a nice used system, Miss that tuned exhaust.
-Lowering 1.5 inches- Gold Lines and Bilstein Shocks.
-New Brake system, maybe a Baer kit, or wilwood or CTS-V. But my brakes -blow, one piston is fucked on the front so something needs to be done.
-Black C6 Z06 rims - Because I want another set of rims, just because.

Thinking of a custom grind Patrick G cam as well. Not sure what the specs will be. This is my winter wishlist though, not just for X-mas.


70 Nova SS - Not an LSX car but...

Going to rebuild the carb.
Go through the fluids and getting it to fire back up.
Then just A LOT of body work. She already has a solid roller cammed LT1, not sure on the specs since I haven't had a chance to touch the motor yet, but the body is the main focus first.

What are you doing with those rusty ass pacesetters? I need headers and I do not feel like actually spending real money on them for this motor since I have damn near 150,000 on it.

 

[Bones]

What are you doing with those rusty ass pacesetters? I need headers and I do not feel like actually spending real money on them for this motor since I have damn near 150,000 on it.

Well they're not really rusty, they have specs of rust since there those armor coated ones. There actually not bad at all, I just want Kooks and a Borla.


I'll be selling them once the off season hits. I'll hit you up first before the others bro.

 

[asainchris]

To have a car powerd by LSX.

 

[Slolane]

fast intake
Cam
ccw dragpack
tune