🔧 BUILD Jeff's Cookie Cutter Kitty and Porsche Killer Mustang GT

[01bluesnake]

Gonna have to wait for UPR to copy either the Steeda or BMR unit first...lol

Damn was hoping it would be more. I knew it wouldn't be as much as the drag unit, but this is A LOT less. Thinking the street version isn't going to be worth the cost and I'm not willing to do the drag version.

The drag K works good, if your not concerned with ditching the sway bar. I have a ton of cars, even the girlfriends S550 who daily's with the drag K member lol. The only reason ill be doing the non drag version on the 350, is to keep the Magneride happy

 

[Jeffs FRC]

The drag K works good, if your not concerned with ditching the sway bar. I have a ton of cars, even the girlfriends S550 who daily's with the drag K member lol. The only reason ill be doing the non drag version on the 350, is to keep the Magneride happy

When I have the street wheels/tires mounted I do like to take an occasional fast corner or two. Don't really want to turn the car into a complete drag car. I'm just not there yet...lol

 

[Jeffs FRC]

01bluesnake

looks like it’s only 16lbs lighter than stock. $550 is a very attractive price, but for only 16lbs I think this is now off my radar.

 

[01bluesnake]

01bluesnake

looks like it’s only 16lbs lighter than stock. $550 is a very attractive price, but for only 16lbs I think this is now off my radar.

That's if your keeping stock motor mounts, the BMR units are lighter. I'll have one here as soon as they start shipping, and will get an exact weight. The drag K member is $550, i'm not sure if he jumped the gun throwing out a price, since it's not actually released by BMR yet. When i was talking with BMR, they were expecting a price point in the 700-800 range, but who knows.

Lethal also said "Well it's finally here and saves 36lbs versus the stock k-member. " so something seems off

 

[Jeffs FRC]

Anyone know where I can find similar adaptors to the ones Antigravity sells in the link below? I'm going to order the ATX20-HD battery setup as they're having a sale starting tomorrow, but the adaptors are at least 1-2 months out from what they told me. 01bluesnake

The rep from Antigravity ssaid this about the adaptors..."they use an M6 bolt with a 1mm pitch if that helps"

Car Terminal Adapters (SAE) – Antigravity Batteries

 

[01bluesnake]

Anyone know where I can find similar adaptors to the ones Antigravity sells in the link below? I'm going to order the ATX20-HD battery setup as they're having a sale starting tomorrow, but the adaptors are at least 1-2 months out from what they told me. 01bluesnake

The rep from Antigravity ssaid this about the adaptors..."they use an M6 bolt with a 1mm pitch if that helps"

Car Terminal Adapters (SAE) – Antigravity Batteries

I have the Antigravity set in stock, but only 1 set left

 

[Jeffs FRC]

I have the Antigravity set in stock, but only 1 set left

Lol Ill take em!

 

[Mook]

 

[Jeffs FRC]

Dang looks great Mook

 

[Jeffs FRC]

21lbs down thanks to these high quality BMR parts that fit like factory!

 

[BOTTLEFED]

You gonna do the k member?

 

[Jeffs FRC]

You gonna do the k member?

Probably not honestly. I’d want the street version and it seems like it’s only a 16lb savings. Not enough to justify the cost.

Think I’m also going to wait on the driveshaft and lightweight battery. I’ll replace when it goes out.

 

[Jeffs FRC]

This fucking SUCKED! My fingers are raw.

 

[Mook]

This fucking SUCKED! My fingers are raw.

View attachment 84665

 

[greasy]

This fucking SUCKED! My fingers are raw.

View attachment 84665

BMR makes light bulbs?

 

[Jeffs FRC]

BMR makes light bulbs?

Man I had that hook in the water for a few days, but patience always pays off! Lmao

 

[greasy]

I saw it and I was like I am not responding to this shit! ???

 

[Jeffs FRC]

Need to vent a little about Diode Dynamics. First, the wiring diagram for the headlight led boards was completely FUCKED. I had to use a diagram for different boards and even that wasn’t correct. Took me a couple hours to get the wiring straight, but after that they function as claimed and look pretty great.

I also installed the DD sequential signals. Well the passenger side signal function doesn’t work. Went on their site and it looks like a 8-12 week back order. GREAT!

 

[BOTTLEFED]

JUNK!!!!

 

[Jeffs FRC]

I’m so fuckin pissed right now

 

[BOTTLEFED]

I’m so fuckin pissed right now

Is it possibly a ground issue??

 

[Jeffs FRC]

Is it possibly a ground issue??

No because the white marker light works. Just doesn’t activate the Amber’s when the signals are on. Both are grounded through same wire. And when I plug the factory light in, it works perfectly

 

[Jeffs FRC]

I’m gonna call DD up tomorrow and see if they have a replacement, but looks like they are 8-12 weeks back ordered so that’s just lovely.

 

[The Beast]

That sucks Jeff hope it all works out quickly

 

[Pressure Ratio]

You should have bought the BMR ones. lol


That sucks to hear. Lights are nowhere new. Why is there constantly issues with aftermarket lights? It's amazing. The tail lights I bought for my car had one that worked but cuaed me to show errors in the car. It had to be replaced. A buddy installed tail lights in his car last week and one side acts goofy. It's Brite like it should be for a second. Then slowly dims. They sent a diode and installed that. Now they don't work at all. It's crazy. All junk.