3800 Who wants to help

[BumpinGTP]

Alright guys, the time has come, i have been staring at all these mods just sitting in my room, so i will be installing them starting saturday morning and working until it is done. i will need some help for some of this stuff, so if anyone has done any of this before, your help is much appreciated. here is the list:

stage 3 cam
stage 3 heads
TOG titanium headers
R/t downpipe
gen 3 1.6 roller rockers
and all the little things associated with this stuff

Click to read more...

 

[imported_snoop]

is the motor already out? call me this weekend i might be able to come out there. orland park right? 708-268-9068. let me know boss.

 

[BumpinGTP]

palos park, right next to orland park, havent decided if i should just drop the subframe or pull the whole motor, what do you think?

 

[imported_snoop]

pull the motor. i am not into that dropping the subframe. so you are using your block that is in the car right now? you got a new trans too right?

 

[BumpinGTP]

no, trans will be as soon as the stock one lets go, which i have a feeling wont be long after this, after it goes, INTENSE 3.69 trans goes in, they will be doing the work

 

[Royalgtp]

I d love to see and help out but im graduating on SAT!.....


Im right by you too...lik 3 miles.

 

[gtphale]

i'll stop by and help out unless I have to work then i'll drop by after work unless its a 12 hour day. Well two ways to go about this drop subframe would be the way I would do it.But only drivers side about seven inches. Or pull the motor. Really up to if you have a hoist and a stand or not.

 

[sweetness]

id be happy to help. I don't know how much helpi would be, but ill help out if you need it. Saturday is bad for me, but i could come out sunday.

BC

 

[Mike K]

I could come out Saturday afternoon. I'd really like to meet some of you guys.

 

[BumpinGTP]

well i spent all day cleaning the garage, and for those of you that have seen my garage, it was literally impossible to walk in there, i can now put a couple cars in there, lol, so we will have plenty of indoor space to work

 

[dole21]

how late you figure you'll be out there working? i could stop by after work

 

[BumpinGTP]

as long as it takes

 

[horist]

If I get some stuff done early saturday I'll swing by to lend a hand...

 

[imported_GraFFix]

Originally posted by horist@May 5 2004, 10:15 PM
If I get some stuff done early saturday I'll swing by to lend a hand...

ditto!

 

[Fish]

I might swing by to watch and bark orders.

"That goes in the green car over there"

:lol:

 

[12secGTP]

if I was not spending the day pulling the mods off my car, I would come out and help.... I just got done doing all that stuff on my car (cam, heads.. etc)
give me a call if you need any advice....

 

[Caedo]

Do you still need a tool bitch???

 

[alexgtp]

Hey tool. If I do not get my parts for the IC. I can help. I will let you know.

 

[1BADGTP]

iw wish i could atop by i am like 10min away. but i have work sat and sat night have to go out with the G/f but i still might stop by whats your address Pm it to me. I am coming from 159 and Lagrange.

that way i can learn some new things.

 

[Fish]

Alright, on a serious note, I should be there to help. What time do you want people over?? Do you need anything special?

 

[BumpinGTP]

i am going to start working around 10am, just come over and if im not awake, come upstairs and wake me up, you guys know the drill, lol, i was bored last night so i decided to start working on it, here is what i got off the car so far.....Supercharger, Lower Intake, Front Head, Front Manifold....i will be taking off the rear head and rear manifold later today. if anyone wants to hang out here tonight and drink and work on the car with me you are more than welcome. just let me know

 

[horist]

Hey Bumpin... can ya PM me your addy? I may swing by sometime after noon ... lemme know if you need any more tools...

 

[staceyyearsich]

HORIST UR A TOOL, u were just there 3wks ago ahahaha I know where bumpin lives

 

[BumpinGTP]

well, progress is slow, ran into a few problems here and there, and have been taking my time, the stage 3 cam is in and everything is ready to be bolted back on the car.

 

[sweetness]

i have tomorrow off if you want help. Let me know.

BC