Started working on replacing the IRS subframe bushing. IRS did not want to go down in the rear and I found out my Bilstiens had to be disconnected (Doesn't mention that in MM installation instructions). Then I used the walk out the bushing with the drill bit trick only to snap two drill bits. So I said screw it and lowered the whole thing so I can burn the bushings out. Hopefully I won't need a permit cause it seems like you need a permit for everything here! :joke:
Anyways, I found out I have the 12mm bolts instead of the 14mm even though I have a 2004 so I guess I will be buying some new bolts.
I need to move the IRS from the garage to the lawn/sidewalk/street to burn out the bushings. I was thinking of using a set of those low profile creepers they use for moving some furniture. Anyone know where I can get a set?
Anyways, I found out I have the 12mm bolts instead of the 14mm even though I have a 2004 so I guess I will be buying some new bolts.
I need to move the IRS from the garage to the lawn/sidewalk/street to burn out the bushings. I was thinking of using a set of those low profile creepers they use for moving some furniture. Anyone know where I can get a set?