Forum Register TCG Mobile Casino Live Posting Feed Garage Arcade Members List Calendar Search Today's Posts Mark Forums Read
Go Back   The Chicago Garage > The Garage > TCG Technical

User Tag List

Like Tree2Likes
  • 1 Post By Handsome Jesus
  • 1 Post By Handsome Jesus

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old 09-29-2015, 09:45 PM   #1
A V6? What a ripoff...
 
Handsome Jesus's Avatar
 
Join Date: Jun 2007
Location: Carpentersville, IL
Posts: 9,144
Casino cash: $15192921
2.07 per day
Default LC1 wideband users: Upgrade to Firmware 1.2!

All,

for those of you using LC1 wideband sensors, I just upgraded to the "beta" 1.2 firmware version, and it really seemed to improve the accuracy and stability of the readings I get from the LC1 during operation.

This may be old news, but I just finally did it and am happy with the result.

It is recommended to flash back to Rev 1.00 first, then flash to the Rev 1.20 RC4 file.

*NOTE* I got an error message that says "cannot connect to device" after flashing with one firmware and then trying to upload the next after a power cycle. The way to resolve the problem is to change a setting on the analog output, and then click program (then change it back to what you want it to be). After doing so, you should have no problem with the firmware upgrade going through.

I attached firmware rev 1.0, and rev 1.2 in .rar (need to unzip them) with this post. Rev 1.1 is available on the Innovate support page of their website.

Final note: this firmware upgrade doesn't require re-calibration of the sensor (though it is probably a good idea anyway, because you know you have not been following the re-calibration schedule)
Attached Files
File Type: rar LC1-V100A.rar (11.2 KB, 51 views)
File Type: rar lc1b120rc4.rar (11.0 KB, 60 views)
Shadow99 likes this.
__________________
Double D Racing: Over-engineered and under-funded

Handsome Jesus...
Handsome Jesus is offline   Reply With Quote
Old 09-29-2015, 10:06 PM   #2
Broke DSMer
 
Shadow99's Avatar
 
Join Date: Jun 2011
Location: Ohare
Posts: 3,608
Casino cash: $23281500
1.22 per day
Default

I have a question about the gauge reading. Maybe you would know whats wrong. I hooked the wiring up correctly, but maybe its the configuration on the program. The gauge will read low numbers, then climb slowly. Till it reachs 15.0 and stay there. Ill check out the firmware update but Im sure this isnt going to help my situation.
Shadow99 is offline   Reply With Quote
Old 09-30-2015, 08:07 AM   #3
Ho fuckin Ho!
 
willizm's Avatar
 
Join Date: May 2009
Location: Saint John, IN
Posts: 10,320
Casino cash: $45039400
2.78 per day
Default

If it's during startup usually the gauge will read 1.0 lambda or 14.7 afr for a few seconds as it's warming up. Once it's warmed up which seems to be about 20 seconds or so then it's ready to go.

I have an LM2 and need to check into a firmware update. I just spent a good deal of time over the weekend getting my histograms and gauges working in HPTuners to read for lambda, commanded lambda and lambda error so hopefully after running the firmware update it doesn't dick my settings.
__________________
turbo: exhaust gasses go into the turbocharger and spin it, witchcraft happens and you go faster.
1998 Supra Turbo 6speed swap in progress | 2010 Escalade Premium | 2006 Highlander

willizm is offline   Reply With Quote
Old 09-30-2015, 11:31 AM   #4
Broke DSMer
 
Shadow99's Avatar
 
Join Date: Jun 2011
Location: Ohare
Posts: 3,608
Casino cash: $23281500
1.22 per day
Default

Right I read into the set up. But the programming I think is where I screwed up. Like this screen.



Sorry to make this into asking question lol. I will update though.
Shadow99 is offline   Reply With Quote
Old 09-30-2015, 11:33 AM   #5
Ho fuckin Ho!
 
willizm's Avatar
 
Join Date: May 2009
Location: Saint John, IN
Posts: 10,320
Casino cash: $45039400
2.78 per day
Default

I left the programmer stock and didn't touch it. I just used the default settings for my logger and got it to work with hpt
willizm is offline   Reply With Quote
Old 09-30-2015, 11:34 AM   #6
Broke DSMer
 
Shadow99's Avatar
 
Join Date: Jun 2011
Location: Ohare
Posts: 3,608
Casino cash: $23281500
1.22 per day
Default

hmm alright
Shadow99 is offline   Reply With Quote
Old 10-01-2015, 07:55 AM   #7
A V6? What a ripoff...
 
Handsome Jesus's Avatar
 
Join Date: Jun 2007
Location: Carpentersville, IL
Posts: 9,144
Casino cash: $15192921
2.07 per day
Default

check that you are connected to the correct analog output, and make sure that the transfer function is from 0-5 volts for 7.35 to 22.39. I use the XD-16 gauge, so I never have an issue with the gauge wiring...

likely going to upgrade to the AFR500 sometime soon, but at least I improved the functionality of the LC1 for now.
Shadow99 likes this.
Handsome Jesus is offline   Reply With Quote
Old 09-12-2018, 03:41 PM   #8
 
Nadanutcase's Avatar
 
Join Date: Sep 2018
Posts: 1
Casino cash: $65000
0.00 per day
Default

First of all THANK YOU FOR POSTING THE FIRMWARE. I am running two Innovate LC's including a NOS LC-1 I bought with a G2 gauge (because I prefer analog style gauges) and found that the controller is still running version 1.00a firmware.

I called Innovate and discovered that AUTOMETER bought them fairly recently and was told they (Autometer) DUMPED pretty much all of the legacy support stuff (it looks like all they have on their website now are manuals). So posts like this firmware are increasingly useful for those of us running their older products.
Nadanutcase is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT -5. The time now is 08:37 AM.


Powered by vBulletin® Version 3.8.1
Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.6.0
User Alert System provided by Advanced User Tagging v3.0.6 (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
no new posts