I saw this truck on the way home from work today. I talked with the guy and took it for a spin. Seems like a pretty good deal and the guy is pretty cool. I thought about it but don't need another toy.
Tons of mods, very clean and fast.
Here is what the guy e-mailed me.
Sean Demarre- (630)518-1395 - 1999 Ford Lighting Black 57K on body
7K on motor
6K on trans
DSS Supermodular block 5.4 liter
8.7-8.4 Comp. Ratio
Forged pistons pro reversed dome
Forged H beam rods
Forged steel crankshaft ? they steal these from 4V navigators
Torque plate bored and honed
Fully balanced and blue printed to racing specs
ARP studs and bolts
High volume oil pump
Federal Mogul bearings & plasma moly rings
DSS main support for bottom end
SOCH PI Romeo heads (stock- they are the revised ones)
Level 10 CNC machined
DSS fully assembled long block (came with all new timing assemblies)
~~~THIS BLOCK WAS BUILT TO SUPPORT 800HP BUT DO NOT RECOMMEND EXCEEDING 750HP
KENNE BELL Blowzilla super charger
12.5 PSI - also have 9.5 PSI pulley
Upon time of motor installation new belt was installed
SCT MAF 90mm Big Bore
MAC cold air 12inch air filter
Cobra R water pump
JLP electric fan kit
60lb motron injectors high impedance
4 core radiator
JBA shorty headers
Borla cat-back exhaust (stock mid pipe and cats)
Built trans with 2200 stall converter
Diablo chip programmed by Speed Inc.
-Extra chip
Full pillar gauges
Oil pressure
Fuel pressure
Air/fuel ratio (do not have wide ban ODB sensor)
Boost
Water temperature
New brake pads and rotors in back (have pads for front)
Upgraded intercooler to specs and efficiencies of the 2001 plus models
Boost-a- pump, boost-a-spark,
Old block and heads available
There is a possibility that the Pioneer TV/Radio may not be included
http://www.autotrader.com/fyc/vdp.j..._style=TRUCKS&doors=&fuel=&lang=en&cardist=11
Tons of mods, very clean and fast.
Here is what the guy e-mailed me.
Sean Demarre- (630)518-1395 - 1999 Ford Lighting Black 57K on body
7K on motor
6K on trans
DSS Supermodular block 5.4 liter
8.7-8.4 Comp. Ratio
Forged pistons pro reversed dome
Forged H beam rods
Forged steel crankshaft ? they steal these from 4V navigators
Torque plate bored and honed
Fully balanced and blue printed to racing specs
ARP studs and bolts
High volume oil pump
Federal Mogul bearings & plasma moly rings
DSS main support for bottom end
SOCH PI Romeo heads (stock- they are the revised ones)
Level 10 CNC machined
DSS fully assembled long block (came with all new timing assemblies)
~~~THIS BLOCK WAS BUILT TO SUPPORT 800HP BUT DO NOT RECOMMEND EXCEEDING 750HP
KENNE BELL Blowzilla super charger
12.5 PSI - also have 9.5 PSI pulley
Upon time of motor installation new belt was installed
SCT MAF 90mm Big Bore
MAC cold air 12inch air filter
Cobra R water pump
JLP electric fan kit
60lb motron injectors high impedance
4 core radiator
JBA shorty headers
Borla cat-back exhaust (stock mid pipe and cats)
Built trans with 2200 stall converter
Diablo chip programmed by Speed Inc.
-Extra chip
Full pillar gauges
Oil pressure
Fuel pressure
Air/fuel ratio (do not have wide ban ODB sensor)
Boost
Water temperature
New brake pads and rotors in back (have pads for front)
Upgraded intercooler to specs and efficiencies of the 2001 plus models
Boost-a- pump, boost-a-spark,
Old block and heads available
There is a possibility that the Pioneer TV/Radio may not be included
http://www.autotrader.com/fyc/vdp.j..._style=TRUCKS&doors=&fuel=&lang=en&cardist=11