$200 with everything.
For sale I have a Version 2 Blade MCP X flybarless radio control helicopter. Its in perfect shape and is actually BETTER than new, it has upgraded blades and a solid carbon main shaft. The stock shaft was hollow, the solid one gives a more solid steady flight. I also have included an extra set of blades on top of everything it comes with new, including all instructions and the box. What you see is what you get!
More info:
The Blade mCP X v2 is the lightest flybarless collective pitch helicopter in its class. It is half the weight of the nearest competition which results in advanced performance, indoors and outdoors.
This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.
It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. Comes with 2.4GHz DSM2 transmitter and two 1S 200mAh 30C batteries, single port charger with AC adapter and a 1S High Current Ultra-Micro Battery Adapter Lead.
Using an integrated AS3X™ Digital Flybarless System, the heli gets up in the air without a mechanical flybar. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mCP X v2 a sense of stability and responsiveness no other collective-pitch heli its size can match.
The Ready to Fly helicopter comes with the DX4e. The helicopters' software has been designed to be used with the DX4e, DX5e, DX6i, DX7, DX7s and DX8 transmitters, while allowing commonly used collective pitch functionality such as throttle hold or stunt mode.
Version 2 Changes:
- Digital 3-Axis AS3X Sensor
- Large Diameter Tail Rotor
- Swashplate Ball Link Dampers
- 2 1S 200mAh 30C Batterys
AS3X™ Digital Flybarless System
Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use
Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes
Very low disc loading results in high maneuverability and good collective response
Lightest heli in its class
Two sets of blades included, fast-flight and high-performance
Robust, long-lasting dual-ball bearing supported linear cyclic servos
Two high-performance flight batteries included
sE9swmcM0vBQBMwDf6Sg~~60_12.JPG)
For sale I have a Version 2 Blade MCP X flybarless radio control helicopter. Its in perfect shape and is actually BETTER than new, it has upgraded blades and a solid carbon main shaft. The stock shaft was hollow, the solid one gives a more solid steady flight. I also have included an extra set of blades on top of everything it comes with new, including all instructions and the box. What you see is what you get!
More info:
The Blade mCP X v2 is the lightest flybarless collective pitch helicopter in its class. It is half the weight of the nearest competition which results in advanced performance, indoors and outdoors.
This helicopter will give transitioning pilots a more agile and capable collective pitch heli that will give them the confidence to master indoor aerobatics without the hesitance which comes with a larger outdoor only platform. Not to mention the cost makes it much more economical when learning.
It comes out of the box 100% factory built and equipped with a factory-installed Flybarless 3-in-1 Control Unit with Spektrum 2.4GHz DSM2 receiver, ESCs, and gyros. Comes with 2.4GHz DSM2 transmitter and two 1S 200mAh 30C batteries, single port charger with AC adapter and a 1S High Current Ultra-Micro Battery Adapter Lead.
Using an integrated AS3X™ Digital Flybarless System, the heli gets up in the air without a mechanical flybar. The core of AS3X technology is a sophisticated, 3-axis digital sensor that stabilizes the rotor head and functions as a heading hold gyro. This, along with its powerful motors and high-precision cyclic servos, gives the mCP X v2 a sense of stability and responsiveness no other collective-pitch heli its size can match.
The Ready to Fly helicopter comes with the DX4e. The helicopters' software has been designed to be used with the DX4e, DX5e, DX6i, DX7, DX7s and DX8 transmitters, while allowing commonly used collective pitch functionality such as throttle hold or stunt mode.
Version 2 Changes:
- Digital 3-Axis AS3X Sensor
- Large Diameter Tail Rotor
- Swashplate Ball Link Dampers
- 2 1S 200mAh 30C Batterys
AS3X™ Digital Flybarless System
Integrated flybarless unit increases stability, control and power, providing the user the ultimate ultra-micro heli experience for indoor and outdoor use
Capable of maneuvers such as inverted hover, loops, flips, rolls, funnels, and hurricanes
Very low disc loading results in high maneuverability and good collective response
Lightest heli in its class
Two sets of blades included, fast-flight and high-performance
Robust, long-lasting dual-ball bearing supported linear cyclic servos
Two high-performance flight batteries included
