1998 Camaro Z28, T-top car
78k Miles
White with white leather seats
Original M6 car, pedal/console/hydraulics are still there
Not parting anything off of it so don't ask!
CLEAN TITLE IN HAND
$4200 obo
Mods include:
Lightweight carpet
255 intank pump
Wolfe racecraft crotch strap on drivers seat
RJS harness on drivers side
Subframe connectors
All calipers have been clearanced for welds/bogarts
Arp studs in front
Berger rear panel
SLP front grill insert
Tinted windows
Front bumper support removed
Brand new headlights installed
Still has a 10 bolt in the rear (unsure on what gear's in it), needs backing plates though. (just on there to roll around on)
Included with the car but not installed
SLP radiator
98 Engine harness with computer
Electric fans
Coolant hoses
washer bottle
and other misc parts
Drop in your motor trans and exhaust and go. I also have a stock short block, 241 heads with prc springs, and plenty of other parts if you want everything, just pm me for details.
Here are some pics when the previous owner had it before it was a roller, it's in the exact same condition, i'll post updated pics tomorrow. Note the wolfe bolt in cage has since been removed and no rims/tires are included (must bring your own unless i find a set).
Regis 847-833-2983
http://ls1tech.com/forums/attachment.php?attachmentid=117483&d=1201236648
http://ls1tech.com/forums/attachment.php?attachmentid=117486&d=1201236648
78k Miles
White with white leather seats
Original M6 car, pedal/console/hydraulics are still there
Not parting anything off of it so don't ask!
CLEAN TITLE IN HAND
$4200 obo
Mods include:
Lightweight carpet
255 intank pump
Wolfe racecraft crotch strap on drivers seat
RJS harness on drivers side
Subframe connectors
All calipers have been clearanced for welds/bogarts
Arp studs in front
Berger rear panel
SLP front grill insert
Tinted windows
Front bumper support removed
Brand new headlights installed
Still has a 10 bolt in the rear (unsure on what gear's in it), needs backing plates though. (just on there to roll around on)
Included with the car but not installed
SLP radiator
98 Engine harness with computer
Electric fans
Coolant hoses
washer bottle
and other misc parts
Drop in your motor trans and exhaust and go. I also have a stock short block, 241 heads with prc springs, and plenty of other parts if you want everything, just pm me for details.
Here are some pics when the previous owner had it before it was a roller, it's in the exact same condition, i'll post updated pics tomorrow. Note the wolfe bolt in cage has since been removed and no rims/tires are included (must bring your own unless i find a set).
Regis 847-833-2983
http://ls1tech.com/forums/attachment.php?attachmentid=117483&d=1201236648
http://ls1tech.com/forums/attachment.php?attachmentid=117486&d=1201236648