2003 Sonic Blue Cobra Coupe, mint 100% clean, 520rwhp, 27K!

SOLD!!!! :(


$27,000 - about 11.5K miles 90% long highway trips no long periods of boost and rare runs to redline. FRESHLY detailed and waxed, now stored with cover and battery tender in garage.

2003 Sonic Blue SVT Cobra Coupe|6089 of 8394|Build Date: 3/18/03|VIN#1FAFP48Y13F404696 factory option polished wheels

85% highway, the rest dyno and city. This car is cooled and fuel ready for a KB or Whipple bolt on (with a new tune of course) for at least 600+rwhp. Current dyno is 520rwhp/519rwtq SAE corrected on 93 octane pump gas.
Mods in detail:

-SCT Tuned by Horsepower by Hermann (3 tunes, 93 octane MAX, 93 DAILY, and valet)
-Stiegemeier Stage 3.5 Ported Supercharger
-BilletFlow 3.10 non-slip upper and 4-piece idlers
-Metco 6lb. lower
-Riechard Racing Tensioner (Spring assist)
-K&N FIPK (with S&B blue filter larger upgrade NEW)
-Borla 14858 Catback
–Bassani Catted X-Pipe
-Bassani Midlength Headers
-Accufab Throttlebody
-Mototron 60lb. Injectors and adapters
-KenneBell Boost-a-Pump
-SCT 2400 MAF
-NGK TR7IX @ .032 gap
-PA Performance 130amp alternator / 3.7 metco pulley
-MGW shifter with Blue handle
-MGW Gripper Shift Knob
-LDC Clutch Freeplay Correction Kit
-Steeda Quick-Release Quadrant
-Fiore Micro-Click Firewall Adjuster
-SLP Line Loc
-Ford Racing/Steeda Adjustable Clutch Cable
-Centerforce DFX Clutch, DF PP, Aluminum Flywheel, TOB
-Liberty Gear 26-spline input shaft
-McLeod TOB Sleeve
-Gordsford Heat Exchanger with Dual Fans
-LDC Cooling Mod
-Meziere Electric Water Pump
-Steeda Oil Separator Kit (drivers side)
-JLT oil separator drivers side
-SHM Oil Breather Separator (passenger side)
-Postban Heat Extractor Hood Mod
-Raptor Performance Shift Light
-Speed of Sound Gauge Pillar
-Innovate Motorsports LC1 wideband with XD16 gauge
-Autometer Gauge Cluster
-Autometer Lunar Boost/Vac, Fuel Pressure, Oil Pressure, Water Temp
-Sylvania Silverstars headlights
-Deluxe Rear Seat Delete by The Motor Company
-PHP Driveshaft Safety Loop
-PEP Traction Control Memory Module
–Ray Hilton’s Boost Gauge Overlay
-Visor Build Number Overlays
-Terminator Emblem Overlay
-Terminator ID Tags (center console and engine bay)
-LDC Blue LED hood light kit
-Ford Shifter Ring
-MGW Cup Holder Bezels
-MGW SVT Hangers
-MGW SVT Lighter Delete
-MGW SVT Dipstick Handle
-UPR AC Panel Insert + knobs
-UPR Billet Radio Panel
-UPR Billet Door Pins
-UPR Fusebox Cover
-SS Inserts 8” billet antenna
-SW Designs Stainless Steel Bumper Inserts
-CC Mustang Side Scoop Grills
-Webelectric Sequential Taillights
-Redline Tuning QuickLift Elite hood strut kit
-Rear: OE Concepts 17x10.5 / Nitto 315 555R
-Front: SVT 17x9 / Goodyear Eagle 275 F1
-KennyBrown Rear Shock Brace
-KennyBrown Springs
-Steeda IRS Subframe bracket kit
–Steeda Differential Bushings
-MM Front Strut Brace
-MM 4-bolt C&C Plates
-MM IRS Full-Length Subframe Connectors
-MM IRS Bushings + 14mm IRS bolts
-MM Front and Rear Spring Isolators
-PHP IRS Toe Link Bars
-BilletFlow/Zone 5 IRS Brace

Aftermarket fluids in car:
Redline 5W30 synthetic engine oil
Royal Purple Synchromax Transmission Fluid

All stock parts free for the taking by purchaser optional (catback, rear seats and seatbelts, shift knob, stock A pillar, spare shift cover (leather boot and plastic), input shaft etc. lots of stuff that could be reinstalled or sold separately, or you could just leave them to rot in my basement.

Fuel filter, Spare FPRS, spare belt (new), spare set of plugs, 4 qts RP synchromax, all original paperwork (booklet brochure, card brochure, build certificate framed, window sticker etc) and whatever else I have is for the taking with this offer.

seat-del0002.jpg


seat-del0001.jpg


Before it was lowered:

rear_view.jpg


front.jpg


drivers_side.jpg


SLP LINE LOC is now where the coin holder is, a carbon fiber covered toggle is where the coinholder is

DSC_0125_resize.jpg


There is a XD16 wideband on the steering column now

DSC_0127_resize.jpg


After lowered:

DSC_0123_resize.jpg


At the race gas pump for before the dyno in Mokena (High Speed Performance) for added safety on the dyno:

test-1.jpg
 

Thread Info