Testing the water Built Turbo Cobra Motor

Status
Not open for further replies.
Priority has changed and im looking to see what I can get for the motor. I built it late last year and it has ZERO miles on it. At this point just seeing if there is any interest and at what price. It is pretty much complete with exception of the intake manifold and cop covers. Motor should be good for 1000rwhp...

Shortblock
2003 Cobra block stock bore 3.552
2003 Cobra forged crank
Manley rods with ARP 2000 bolts
Manley 2810 platinum 18cc spherical dish pistons
File to fit plasma rings
ARP main bolts
ARP head bolts
Ford HO oil pump with billet gears
Canton windage tray
Oil pan tapped for turbo drainline
Felpro perma torque multilayer steel head gaskets

Heads/valvetrain
2003 (Blue paint) Cobra heads stage one port(cleaned and smoothed runners, heads resurfaced, pressure tested, pressure cleaned, valve job, machined valves
2003 stock cams
Crower stage 3 springs
Crower stage 3 retainers
7500rpm capable

Other
1999 timing cover
1999 alternator setup
1999 pulley configuration
1999 water tube
2003 valve covers
2003 coil on plugs
All new gaskets and seals

Motor looks like this but now has the 99 parts on it
 

Attachments

  • DSCN0954Internet.JPG
    DSCN0954Internet.JPG
    70.2 KB · Views: 134
  • DSCN0955Internet.JPG
    DSCN0955Internet.JPG
    75.5 KB · Views: 26
  • DSCN0957Internet.JPG
    DSCN0957Internet.JPG
    67.6 KB · Views: 19
  • DSCN0956Internet.JPG
    DSCN0956Internet.JPG
    66.9 KB · Views: 17
  • CIMG0395internet.JPG
    CIMG0395internet.JPG
    166.7 KB · Views: 134
  • CIMG0395internet2.JPG
    CIMG0395internet2.JPG
    166.8 KB · Views: 131
  • Motor1.jpg
    Motor1.jpg
    158.6 KB · Views: 19
Status
Not open for further replies.

Thread Info