Parting out car

Putting the car back to stock, nobody wants to buy a built cobra unless it's got a KB on it, i'll make more money this way or bring it to carmax or something.

LFP heat exhchanger- 150 obo Pending

4lb lower pulley $280 obo

Steigmeir stage 3 ported eaton with 2.8 steeda upper pulley SOLD

Kenne bell 40 amp boost-a-pump $220 obo SOLD! HOOFNIT1

Billetflow 4 piece idler set with auxilary idler bracket (all clear with 3 100's, 1 90mm pulley) $200 obo + your stock idlers SOLD!

SCT Ba2800 maf $225 obo SOLD cobrachis08

SCT Xcal2 - $315 obo unlocked!

60lb injectors with harnesses- $350 SOLD kegger

Tremec black ball shift knob with 6spd pattern and tremec logo $35 obo

Raptor shiftlight (black with red LED) and gauge cluster surround (need your stock gauge surround if possible) also have red rubber cover for light $65 obo

SOLD DSG03COBRA

Autometer phantom 2 1/16th -30 +30 boost gauge with guage cup mounted on stock steering wheel column trim $50 obo plus your stock column trim

Steeda tri-ax short throw shifter $70 obo

Speed inc maf adapter with 10" K&N $70 obo

WHAT I NEED!

Complete IRS with everything minus calipers CASH IN HAND

STOCK FRONT STRUTS



NOT LOOKING TO SELL MY SOLID AXLE UNTIL MY CAR HAS AN IRS BACK IN IT, I DONT WANT ANY DOWN TIME

what i will have for sale soon
94-98 mustang gt solid rear, axle tubes welded
Ford motorsport 3.73 gear
Powerstop slotted rotors, new pads
UPR double adjustable upper control arms
Behind bars race cars solid lower control arms
Bullitt rear springs
UPR spherical aluminum differential bushings
Strange 10 way adjustable shocks
BBK isolators
LPW differential cover
Stock 94 GT rear sway bar
cobra pinion flange to mate up with stock 03 alum driveshaft

Click to read more...

 

[whistlen93]

damn you sound seriuos this time.

 

[Mr. Unknown]

PM sent.

 

[The Pun]

I got a stock blower off of Michelle's car, how much for a trade for the steggy?

 

[Oncebitten03]

damn you sound seriuos this time.

Yea, found a notch roller i REALLY wanna get in the next week. lets just say i had to take the gf on a shipping adventure today so she'd quit bitching about it lol

 

[Oncebitten03]

I got a stock blower off of Michelle's car, how much for a trade for the steggy?

throw me an offer you sexy bitch

 

[Oncebitten03]

throw me an offer you sexy bitch

guage/pod on column

 

[Mr. Unknown]

I've call dibs on the Maf,BAP and Injectors. I'll pass on the Boost gauge.

 

[dougwaz]

I'll take the shifter

Thanks 847-361-1794

 

[sschassis]

Irs

:burnout: I have complete irs with 411 gear for $1200 or - rotors & calipers for $1000 if you are interested give me cal 847 678 3000 or cell 847 812 2077 ... nile
-------------------------------------------------------------------------------------------------------------------------------------------------------------

Putting the car back to stock, nobody wants to buy a built cobra unless it's got a KB on it, i'll make more money this way or bring it to carmax or something.

LFP heat exhchanger- 10k miles, great shape 150 obo

4lb lower pulley $280 obo + your stock lower pulley

Steigmeir stage 3 ported eaton with 2.8 steeda upper pulley $350 + your stock eaton with stock pulley

Kenne bell 40 amp boost-a-pump $220 obo

Billetflow 4 piece idler set with auxilary idler bracket (all clear with 3 100's, 1 90mm pulley) $200 obo + your stock idlers

SCT Ba2800 maf $225 obo

SCT Xcal2 - $315 obo unlocked!

60lb injectors with harnesses- $350 obo

Tremec black ball shift knob with 6spd pattern and tremec logo $35 obo

Raptor shiftlight (black with red LED) and gauge cluster surround (need your stock gauge surround if possible) also have red rubber cover for light $65 obo

Autometer phantom 2 1/16th -30 +30 boost gauge with guage cup mounted on stock steering wheel column trim $50 obo plus your stock column trim

Steeda tri-ax short throw shifter $70 obo

Speed inc maf adapter with 10" K&N $70 obo

WHAT I NEED!

Complete IRS with everything minus calipers CASH IN HAND
STOCK INJECTORS
STOCK MAF
STOCK FRONT STRUTS
STOCK LOWER CRANK PULLEY
STOCK EATON WITH STOCK PULLEY

NOT LOOKING TO SELL MY SOLID AXLE UNTIL MY CAR HAS AN IRS BACK IN IT, I DONT WANT ANY DOWN TIME

what i will have for sale soon
94-98 mustang gt solid rear, axle tubes welded
Ford motorsport 3.73 gear
Powerstop slotted rotors, new pads
UPR double adjustable upper control arms
Behind bars race cars solid lower control arms
Bullitt rear springs
UPR spherical aluminum differential bushings
Strange 10 way adjustable shocks
BBK isolators
LPW differential cover
Stock 94 GT rear sway bar

 

[Oncebitten03]

:burnout: I have complete irs with 411 gear for $1200 or - rotors & calipers for $1000 if you are interested give me cal 847 678 3000 or cell 847 812 2077 ... nile
-------------------------------------------------------------------------------------------------------------------------------------------------------------

Little more than i wanted to spend at this time, looking for a completely stock one

 

[rocket5979]

I will probably take the boost gauge and mount off of your hands. I would not be able to supply a stock Mustang column trim because this is going in the Explorer. If you still want to do a deal then let me know.

 

[02mingreyconv]

I will probably take the boost gauge and mount off of your hands. I would not be able to supply a stock Mustang column trim because this is going in the Explorer. If you still want to do a deal then let me know.

I have a stock mustang GT trim that I can sell to you for a 12 pack.

 

[SLASH]

lets work a swap for the rear, i have a 14k irs w/ 4:10's at han's place now!

 

[Oncebitten03]

man nobody has stock 3.55's in theres anymore? lol

i'll be pulling mine out at my work. is yours out of the car aleady? what kind of trade are you looking to do. i have someone else interested in it also but it's a 99 IRS with a 3.27

 

[SLASH]

call me tomorrow, the car is at hans shop now..we can discuss it

847-354-5533

 

[Oncebitten03]

To the top! Heat exchanger is sold

Got my new project car today so this shit's gotta go

 

[Oncebitten03]

To the top!

SOLID SOLD

 

[Oncebitten03]

to the top

 

[superninja]

i want the strange 10 ways...i got dibs
i have the stock ones and a stock crank pulley

 

[Bigturbonotch]

lets see some pictures of the project car.

 

[01LaserRedCobra]

:biggthump :biggthump :biggthump :biggthump :biggthump :burnout: :burnout: :burnout: :burnout: :laughing2 :alcoholic hit me up asap.... gotta lil deal for ya :biggthump :headbang: :clap: :argue: :lmao:

 

[DSG03COBRA]

I got my stock pullied Eaton laying around if you still need one... lemme know...

 

[gnxs]

Regis,

Regarding your list of needs....I have:

- Stock IRS assembly, but without shocks/axles (not sure if that helps ya)
- Stock MAF
- Stock Lower Pulley/Assembly

 

[smith876]

I'll take:
4lb lower pulley
Billetflow 4 piece idler set with auxilary idler bracket
Raptor shiftlight


And will send you:
stock lower pulley
stock idlers
stock gauge surround

I'll pay 475 for the three and since I no longer live in the Chicago area I'll ship everything to you, and provide a FedEx label filled out and billed to my acct so you can ship back to me.