I am parting out the cobra....
What I would like to do, is find someone on this board who is local to do all the swapping. That way, there is no shipping charges and it will take a weekend of work, that is it. Here are the two possibilities....
possibility one...
I would like to SWAP motors and EXHAUST with a relitively stock 03 cobra. Here is what my motor has into it.
MP shortblock
$3,195.00
$3,195.00
CP Pistons/File to fit rings/F/M Rod Bearings
F/M Main bearings/Viton rear seal
dissassemble/bore/hone/pin fit rods-pistons
balance, wash and assemble/FelPro head gask.
ARP Main studs/ARP head studs
assemble longblock/install cams
2.4 Kenne bell supercharger
$3000
kb throttle body
$300
60lb injectors and harness and sct maf
$900
jlt cai
$100
1
Crower Valve Springs
$749.00
$749.00
1
Billet Oil Pump Gears
$275.00
$275.00
1
Manley 14042R rods
$499.00
$499.00
1
Canton Windage Tray
$79.00
$79.00
1
JDM Stage III cams
$1,199.00
$1,199.00
1
Cooling Mod
$80.00
$80.00
1
Metco 8lb. Lower/Altenator Pulley/shipping
$589.00
$589.00
1
8 rib belt
$50.00
$50.00
3
bearings for idler pullies
$5.00
$15.00
bassani headers
$700
X pipe
$200
mac catback
$200
8
BR7EF spark plugs
$2.25
$18.00
Nitrous bottle, wot switch, rpm window, purge, lines, etc.
$600
DFX clutch, Pressure plate and 26 spline input shaft
$500
LABOR
6
2.4 install
$85.00
$510.00
7
Dyno tuning/street tuning
$70.00
$490.00
2.5
Lower Pulley/Altenator pulley install
$85.00
$212.50
SUBTOTAL $14,360.50
plus little things like powdercoated spark covers, torch red colored jlt cai, etc.
I would be willing to do an engine and exhaust swap for around $8,000 out the door with a burnt chip for all the mods which would save you $6360.50 from doing it yourself from scratch. I also have the MD motorsports fuel system upgrade and kenne bell bap if someone wants to go all out.
the second option is if someone wants to just trade blowers and buy the nitrous kit.
I will trade blowers, (stock or steg port) and my nitrous kit with all accessories for $3600.
I also have 2 pairs of 18x9 AFS chrome 03 Cobra wheels with nitto street tires and also a pair of chrome afs 03 wheels in 18x10.5's with BRAND NEW 315-30-18 bfg dr's on them. I would like to get stock 17 machine finished wheels with stock tires and $3,000 for this trade.
The reason I am parting out the car is I am going to be selling it and investing the money into my real estate business I am getting launched this year.
Let me know if you have any interest!
contact info.... Eric Jones
personal cell- 630-768-0761
email- [email protected]
What I would like to do, is find someone on this board who is local to do all the swapping. That way, there is no shipping charges and it will take a weekend of work, that is it. Here are the two possibilities....
possibility one...
I would like to SWAP motors and EXHAUST with a relitively stock 03 cobra. Here is what my motor has into it.
MP shortblock
$3,195.00
$3,195.00
CP Pistons/File to fit rings/F/M Rod Bearings
F/M Main bearings/Viton rear seal
dissassemble/bore/hone/pin fit rods-pistons
balance, wash and assemble/FelPro head gask.
ARP Main studs/ARP head studs
assemble longblock/install cams
2.4 Kenne bell supercharger
$3000
kb throttle body
$300
60lb injectors and harness and sct maf
$900
jlt cai
$100
1
Crower Valve Springs
$749.00
$749.00
1
Billet Oil Pump Gears
$275.00
$275.00
1
Manley 14042R rods
$499.00
$499.00
1
Canton Windage Tray
$79.00
$79.00
1
JDM Stage III cams
$1,199.00
$1,199.00
1
Cooling Mod
$80.00
$80.00
1
Metco 8lb. Lower/Altenator Pulley/shipping
$589.00
$589.00
1
8 rib belt
$50.00
$50.00
3
bearings for idler pullies
$5.00
$15.00
bassani headers
$700
X pipe
$200
mac catback
$200
8
BR7EF spark plugs
$2.25
$18.00
Nitrous bottle, wot switch, rpm window, purge, lines, etc.
$600
DFX clutch, Pressure plate and 26 spline input shaft
$500
LABOR
6
2.4 install
$85.00
$510.00
7
Dyno tuning/street tuning
$70.00
$490.00
2.5
Lower Pulley/Altenator pulley install
$85.00
$212.50
SUBTOTAL $14,360.50
plus little things like powdercoated spark covers, torch red colored jlt cai, etc.
I would be willing to do an engine and exhaust swap for around $8,000 out the door with a burnt chip for all the mods which would save you $6360.50 from doing it yourself from scratch. I also have the MD motorsports fuel system upgrade and kenne bell bap if someone wants to go all out.
the second option is if someone wants to just trade blowers and buy the nitrous kit.
I will trade blowers, (stock or steg port) and my nitrous kit with all accessories for $3600.
I also have 2 pairs of 18x9 AFS chrome 03 Cobra wheels with nitto street tires and also a pair of chrome afs 03 wheels in 18x10.5's with BRAND NEW 315-30-18 bfg dr's on them. I would like to get stock 17 machine finished wheels with stock tires and $3,000 for this trade.
The reason I am parting out the car is I am going to be selling it and investing the money into my real estate business I am getting launched this year.
Let me know if you have any interest!
contact info.... Eric Jones
personal cell- 630-768-0761
email- [email protected]