Fbody and Wbody parts (headlights, stock parts, Loudmouth, Air compressor)

And more! All prices are OBO. Posting everything here first and then if there are no bites will head to the make-specific forums. Can provide more details and pics on everything. I store these parts at my mom's and she's putting the house up for sale. I don't have a garage spot at my place so everything needs to go!

Fbody
1998 complete manifolds, cats, y-pipe and EGR/Air system sold
6939542177_4e58cffc0c_z.jpg

6793429818_acdef6596b_b.jpg


SLP Loud Mouth Gen I catback. Was cut up for removal Sold
6793429338_2d0cff6c3d_z.jpg

6939541861_6c2c49870e_b.jpg

6939541713_0204cb013a_z.jpg

6793429696_62c8341c92_z.jpg


Fbody stock rear LCA (pair) $50
6793429134_651cdaafbb_b.jpg

6939541493_2dbeaaef3c_z.jpg


LS1 intake manifold - $150
6939541199_9225f23ff4_b.jpg

6939541251_b2b578b666_b.jpg


LS1 stock injectors - $50
4L60E stock torque converter - $80
6793428264_b0e55944e1_z.jpg


Stock fbody fuel pump and assembly- $30
6793428194_49d5114a55_z.jpg


1998 stock torque arm $30
6939542289_0fffd4969b_z.jpg


Wbody/Grand Prix
Grand Prix Projector headlights $70
6939543035_704a9c6d4f_z.jpg

cruise057.jpg


Stock GTP stereo $20
6793428428_1f5cb8e5e2_z.jpg


9-inch K&N cone filter, needs cleaning Part RE-0870 $10 - Pending
6939542801_2a9fbb1f7a_z.jpg


L67 Exhaust manifolds $70
6939542715_a15864317c_z.jpg


Stock rear sway, upgraded front but ears are starting to crack $20
6939542477_c73ea92733_b.jpg


Miscellaneous
Pennzoil and Checkered flags, new. Great for garage $10
6939541103_fb98dcb26c_z.jpg
 
Last edited:

Bru

Moderator
Staff member
Moderator
TCG Premium
May 24, 2007
40,504
10,201
Air Compressor.... It works? Anything wrong?

I bought it from Ron Vogel a few years ago and only used it twice. It blows the breaker in the garage so it was a hassle to run the cord to the basement. I never used it more than twice. I'll try and find his original for sale thread with details.

interested in the GTP black headlight housings, do they come with the corners also?

Sure does. Here's what they look like installed. I can get some close ups if you want. There's some goop visible from when I sealed them up but you'd probably need to remove that and re-seal them since they've been sitting so long.

blackisbetter013resize.jpg
 

Bru

Moderator
Staff member
Moderator
TCG Premium
May 24, 2007
40,504
10,201
Projector low beams and reflector high beams. Yup, they have halo rings that illuminate when tapped into the correct wiring.

They need some work to reduce bounce. The housings are cheaply made and without support they bounce. It's a well documented problem on the GP boards with the first batch of these. There are solutions but I never got around to messing with them.

http://www.clubgp.com/newforum/tm.a...unce&language=single&tmode=&smode=&s=#4421712
 

Bru

Moderator
Staff member
Moderator
TCG Premium
May 24, 2007
40,504
10,201
Inlet size on the filter?

Also interested in air compressor and hose if sinister backs out

Here are the filter specs. Unfortunately there's someone else in line for the compressor before you, Adam. I'll let you know if both back out.

Part RE-0870 Product Specifications
Product Style: Round Tapered Universal Air Filter
Base Outside Diameter: 6 in (152 mm)
Flange Inside Diameter: 4 in (102 mm)
Flange Length: 1.75 in (44 mm)
Flange Type: Centered
Height: 9 in (229 mm)
Top Outside Diameter: 4.625 in (117 mm)
Top Style: Rubber
Top Material/Finish: None
Filter Material: Cotton Gauze
Flanges: 1
Filter Re-Oiling Amount: 1.87 oz (55 ml)
Weight: 2 lb (0.9 kg)
Product Box Length: 6.31 in (160 mm)
Product Box Width: 6.31 in (160 mm)
Product Box Height: 10.75 in (273 mm)
 

Thread Info