Got a pair of Brand New in the box PRC 215cc CNC Ported Cylinder heads from Texas Speed. These heads are a new casting, not ported GM Heads. They are very impressive and they are the same cylinder head that currently holds the fastest stock bottom end LS1 heads / cam record. I bought these heads with the intention of doing a H/C combo but I have now decided to go with a turbo setup. These heads are in mint condition.
215cc Fully CNC Ported Intake Runners
84cc Fully CNC Ported Exhaust Runners
Small Bore Chambers For Increased Horsepower & Torque+
PRC Platinum Spring Kit Rated To .650" Lift
59cc CNC Machined Combustion Chambers (Heads were special ordered this way for higher compression and would put compression around 11.5:1 with a cometic head gasket on a LS1 engine)
2.04" Intake / 1.600" Stainless Valves
Factory Rocker Friendly!!
Flow Data:
LIFT___INTAKE FLOW___EXHAUST FLOW
.100"_____68 CFM________56 CFM
.200"____145 CFM_______115 CFM
.300"____214 CFM_______167 CFM
.400"____271 CFM_______202 CFM
.500"____304 CFM_______219 CFM
.600"____318 CFM_______238 CFM
.650"____321 CFM_______236 CFM
These Heads are normally $2400
Looking to get $1800
Click the link for more information:
http://www.texas-speed.com/c-514-cylinder-heads.aspx
Also open to trades for Turbo Parts so let me know what ya got
215cc Fully CNC Ported Intake Runners
84cc Fully CNC Ported Exhaust Runners
Small Bore Chambers For Increased Horsepower & Torque+
PRC Platinum Spring Kit Rated To .650" Lift
59cc CNC Machined Combustion Chambers (Heads were special ordered this way for higher compression and would put compression around 11.5:1 with a cometic head gasket on a LS1 engine)
2.04" Intake / 1.600" Stainless Valves
Factory Rocker Friendly!!
Flow Data:
LIFT___INTAKE FLOW___EXHAUST FLOW
.100"_____68 CFM________56 CFM
.200"____145 CFM_______115 CFM
.300"____214 CFM_______167 CFM
.400"____271 CFM_______202 CFM
.500"____304 CFM_______219 CFM
.600"____318 CFM_______238 CFM
.650"____321 CFM_______236 CFM
These Heads are normally $2400
Looking to get $1800
Click the link for more information:
http://www.texas-speed.com/c-514-cylinder-heads.aspx
Also open to trades for Turbo Parts so let me know what ya got