Started with a 1977 460 block...
.030 over
speed pro h535cp pistons
eagle rods
al's machine shop in woodstock, il did all machine work
weiand stealth aluminum intake manifold
cam is crane cams
Grind Number: H-272-2 (Replaces HMV-272-2A)Operating Range:2000-5000 RPMDuration Advertised:272° Intake / 284° ExhaustDuration @ .050'' Lift:216° Intake / 228° ExhaustValve Lift w/1.71 Rockers:.518'' Intake / .513'' ExhaustLobe Separation Angle:112°Max Lift Angle:107° ATDC Intake / 117° BTDC ExhaustOpen/Close @.050'' Cam Lift:Intake - 1° BTDC (opens) / 35° ABDC (closes)
Exhaust - 51° BBDC (opens) / (3°) BTDC (closes)
crane cams hydraulic lifters
Crane Cams #271-99280-16
Hydraulic Flat Tappet Lifters69-82 Ford Cleveland 302-400
62-91 Ford 221-351W
68-91 Ford 370-460
16/pkg
eagle 8740 rod bolts
iron heads ported to match super cobra jet heads
intake- 2.25
exhaust- 1.75
needs rockers, carb, timing chain, oil pump & oil pan. has a bunch of gaskets and receipts.
also have build sheet- will get all specs and info loaded asap...
I'm listing this for a friend, pm me with any questions.
Machine work alone- 980$ worth
1500$ OBO.
flexible.
.030 over
speed pro h535cp pistons
eagle rods
al's machine shop in woodstock, il did all machine work
weiand stealth aluminum intake manifold
cam is crane cams
Grind Number: H-272-2 (Replaces HMV-272-2A)Operating Range:2000-5000 RPMDuration Advertised:272° Intake / 284° ExhaustDuration @ .050'' Lift:216° Intake / 228° ExhaustValve Lift w/1.71 Rockers:.518'' Intake / .513'' ExhaustLobe Separation Angle:112°Max Lift Angle:107° ATDC Intake / 117° BTDC ExhaustOpen/Close @.050'' Cam Lift:Intake - 1° BTDC (opens) / 35° ABDC (closes)
Exhaust - 51° BBDC (opens) / (3°) BTDC (closes)
crane cams hydraulic lifters
Crane Cams #271-99280-16
Hydraulic Flat Tappet Lifters69-82 Ford Cleveland 302-400
62-91 Ford 221-351W
68-91 Ford 370-460
16/pkg
eagle 8740 rod bolts
iron heads ported to match super cobra jet heads
intake- 2.25
exhaust- 1.75
needs rockers, carb, timing chain, oil pump & oil pan. has a bunch of gaskets and receipts.
also have build sheet- will get all specs and info loaded asap...
I'm listing this for a friend, pm me with any questions.
Machine work alone- 980$ worth
1500$ OBO.
flexible.